John Deere 54"-60" Front Plow UHMW Plow Edge/Kit
Free Ground Shipping within the USA in the
Lower 48 States via UPS and the USPS
The UHMW Plow Edge is an excellent replacement for the steel plow edge. Our SBS LLC, UHMW Bar and Kits are for the
54” and 60” Deere Front Quick Hitch Plows.
Our Standard UHMW Edge is 1/2” thick UHMW material
Our Commercial UHMW Edge is 3/4” thick UHMW Material
How do I order my UHMW Plow Edge?
Select my plow size from the 54 and 60 buttons
Select the UHMW thickness or Duty, Standard or Commercial. When you click on the different buttons, the different prices are displayed.
Compare the cost for single edge, vrs double edge UHMW wear bars. Check out the estimated wear duration list below for an idea of how long these edges will last.*
Select the Duty and the Single Edge or Double Edge, add to your cart.
Complete your name and shipping information and payment method and we will handle the rest.
Thank You for your interest in our products. Please contact us with any questions.
Sections below with additional information if needed to answer questions or concerns.
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
Cost and Use Example for the 54” Plow
Why do we offer the single sided UHMW wear bars?
Here is why we offer the Double Wear Edge Sided Wear Bars
Range of UHMW Plow Wear Bars Offered
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Why switch to a UHMW Plow Edge?
A few Questions and Answers about these UHMW wear edges
Life Expectancy of the normal use of the UHMW Plow wear bars*
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
A choice for every plow owner.
Our Single Edge UHMW Wear bars provide one wear edge. You install the UHMW wear edge and when that wear side is used up, the bar needs to be replaced.
Our Double Wear Edge UHMW Bars provide two complete wear edges, The Double Wear Edge bar can be flipped over when the first side wear bar is exhausted and the second side wear bar provides an entire additional wear bar. When you have used up both sides of the Double Wear Edge, then its replacement time.
Cost and Use Example for the 54” Plow
Single Sided UHMW Wear Bar in 1/2” UHMW sells for $155
Double Sided 1/2” UHMW wear bar sells for $190
When the single sided wear bar is worn out, throw it away and start over. When the double sided wear bar wears down side 1, flip over the UHMW wear bar and start to use side 2. The $190 buys twice the wear life compared to the $155. This is why we offer choices.
Why do we offer the single sided UHMW wear bars?
Because for many residential tractor owners, the single sided UHMW wear bar will last years, some up to 10 years. If the tractor owner plows their drive and little more, why spend $190 for a wear edge which you likely won’t need for many, many years, if at all?
Here is why we offer the Double Wear Edge Sided Wear Bars
Many tractor owners plow just their driveway or theirs and a neighbor or two. I plow 34 drives each time it snow. This winter, I have plowed 25 times since mid November, That means I have cleared 850 drives this year alone.
I am using the Commercial Duty, Double Sided UHMW wear bar as that will likely last me 3 seasons of use even at this level. Different owners have different needs.
I understand than many tractor owners don’t plow their own driveway 34 times a winter, which is what happens when I plow the drives on my route on each snowfall. Different people have different needs. We can make the edge which meets these needs and makes the most sense for each owner. After all, its about providing solutions.
In this case, the Double Edge Wear bars provide twice the wear life for just a slight increase in the cost for the Double Edge Wear bars. This Makes our UHMW Double Edge wear bar an excellent value and best choice for most UHMW Wear bar for the money.
Range of UHMW Plow Wear Bars Offered
We offer these edges in the following combinations for the 54” and 60” Deere Front Quick Hitch Plows at the list of edge options shown below. We offer 8 different plow wear bars for these two plows and also a choice of 2 different hardware types, which means we offer 16 choices for our customers.
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Wear Bars with Corrosion Resistant Hardware
54” Plow, Single Sided Standard Wear bar with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
Kits with Marine Grade Stainless Hardware.
54” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar KIT with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, KIT with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar KIT with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar KIT with 3/4” UHMW
Why switch to a UHMW Plow Edge?
Ends all pavement surface abrasion and damage.
No more rust on the pavement or garage floor
Protects pavement surfaces from asphalt sealer damage and pavement scraping, scuffing and surface abrasion.
Quieter, no more metal banging and scraping on the pavement
UHMW will outlast the mild steel wear edge when used correctly.
Helps to Protect the blower, tractor and operator against surface edge impact damage from steel edge impacts on raised surfaces.*
Most who switch can’t believe they waited this long. Very few ever return to a steel plow edge.
The UHMW is smooth, quiet and a great pavement clearing product.
*The UHMW can absorb some of the impact energy which steel edges won’t. But please understand the danger of running into something solid is always risky and often will damage equipment and could injure the tractor operator. Please be careful…..
A few Questions and Answers about these UHMW wear edges
Q.- How long does it take to change the plow edges on these plows?
A. - It’s very simple and quick. In less than 20 minutes, you can remove the steel edge and replace it with our UHMW wear edge or Kit.
Q. - What’s the difference between a wear edge and a wear edge kit?
A.- Our wear edges are the UHMW with our corrosion resistant hardware. Our Edge KITS are our same edges but shipped with Marine grade stainless hardware.
Q.- Does the UHMW clear the pavement as well as a steel edge?
A.- Actually better, and it does so without scraping, scoring or damaging the pavement surface.
Made in America with American Sourced Components. We make all of our wear edges ourselves in our West Michigan Plant. Thank you for your interest in our products.
Life Expectancy of the normal use of the UHMW Plow wear bars*
Number of residential driveway clearings with these assumptions*
1/2” UHMW Single Sided Wear bar,- 250
1/2” UHMW Double Sided Wear bar-480
3/4” UHMW Single Sided Wear Bar - 390
3/4” UHMW Double Sided Wear Bar - 750
Estimates only, actual results will vary. No guarantees of these results are being implied or made in any way.
These are simply wear estimates based upon proper use of the tractor and implement. Assumptions also include
Assumes using a x7xx garden tractor. Experienced operator.
Residential driveways 25% asphalt and 75% concrete
Average driveway length is 200’, width is 12’ and paved sq footage is 2,700
Assumes using a front quick hitch and down pressure is properly applied.
Wears 85% of possible wear material. Possible wear material is when the edge of the UHMW strap is within 1/8” of plow bottom edge.
The estimates provided are merely estimates based upon measuring actual wear of the product after every 30 driveways. Actual results will be different. No guarantees of results are being made or implied.
Please note, while the UHMW edge is much gentler on pavement than the steel plow edge, the UHMW edge can still remove some pavement patches and repairs due to the UHMW edge being strong enough to grab pavement repairs. If your pavement has crack filling, etc. be careful with the down pressure to avoid removing crack filler and other pavement repairs.
Free Ground Shipping within the USA in the
Lower 48 States via UPS and the USPS
The UHMW Plow Edge is an excellent replacement for the steel plow edge. Our SBS LLC, UHMW Bar and Kits are for the
54” and 60” Deere Front Quick Hitch Plows.
Our Standard UHMW Edge is 1/2” thick UHMW material
Our Commercial UHMW Edge is 3/4” thick UHMW Material
How do I order my UHMW Plow Edge?
Select my plow size from the 54 and 60 buttons
Select the UHMW thickness or Duty, Standard or Commercial. When you click on the different buttons, the different prices are displayed.
Compare the cost for single edge, vrs double edge UHMW wear bars. Check out the estimated wear duration list below for an idea of how long these edges will last.*
Select the Duty and the Single Edge or Double Edge, add to your cart.
Complete your name and shipping information and payment method and we will handle the rest.
Thank You for your interest in our products. Please contact us with any questions.
Sections below with additional information if needed to answer questions or concerns.
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
Cost and Use Example for the 54” Plow
Why do we offer the single sided UHMW wear bars?
Here is why we offer the Double Wear Edge Sided Wear Bars
Range of UHMW Plow Wear Bars Offered
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Why switch to a UHMW Plow Edge?
A few Questions and Answers about these UHMW wear edges
Life Expectancy of the normal use of the UHMW Plow wear bars*
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
A choice for every plow owner.
Our Single Edge UHMW Wear bars provide one wear edge. You install the UHMW wear edge and when that wear side is used up, the bar needs to be replaced.
Our Double Wear Edge UHMW Bars provide two complete wear edges, The Double Wear Edge bar can be flipped over when the first side wear bar is exhausted and the second side wear bar provides an entire additional wear bar. When you have used up both sides of the Double Wear Edge, then its replacement time.
Cost and Use Example for the 54” Plow
Single Sided UHMW Wear Bar in 1/2” UHMW sells for $155
Double Sided 1/2” UHMW wear bar sells for $190
When the single sided wear bar is worn out, throw it away and start over. When the double sided wear bar wears down side 1, flip over the UHMW wear bar and start to use side 2. The $190 buys twice the wear life compared to the $155. This is why we offer choices.
Why do we offer the single sided UHMW wear bars?
Because for many residential tractor owners, the single sided UHMW wear bar will last years, some up to 10 years. If the tractor owner plows their drive and little more, why spend $190 for a wear edge which you likely won’t need for many, many years, if at all?
Here is why we offer the Double Wear Edge Sided Wear Bars
Many tractor owners plow just their driveway or theirs and a neighbor or two. I plow 34 drives each time it snow. This winter, I have plowed 25 times since mid November, That means I have cleared 850 drives this year alone.
I am using the Commercial Duty, Double Sided UHMW wear bar as that will likely last me 3 seasons of use even at this level. Different owners have different needs.
I understand than many tractor owners don’t plow their own driveway 34 times a winter, which is what happens when I plow the drives on my route on each snowfall. Different people have different needs. We can make the edge which meets these needs and makes the most sense for each owner. After all, its about providing solutions.
In this case, the Double Edge Wear bars provide twice the wear life for just a slight increase in the cost for the Double Edge Wear bars. This Makes our UHMW Double Edge wear bar an excellent value and best choice for most UHMW Wear bar for the money.
Range of UHMW Plow Wear Bars Offered
We offer these edges in the following combinations for the 54” and 60” Deere Front Quick Hitch Plows at the list of edge options shown below. We offer 8 different plow wear bars for these two plows and also a choice of 2 different hardware types, which means we offer 16 choices for our customers.
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Wear Bars with Corrosion Resistant Hardware
54” Plow, Single Sided Standard Wear bar with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
Kits with Marine Grade Stainless Hardware.
54” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar KIT with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, KIT with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar KIT with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar KIT with 3/4” UHMW
Why switch to a UHMW Plow Edge?
Ends all pavement surface abrasion and damage.
No more rust on the pavement or garage floor
Protects pavement surfaces from asphalt sealer damage and pavement scraping, scuffing and surface abrasion.
Quieter, no more metal banging and scraping on the pavement
UHMW will outlast the mild steel wear edge when used correctly.
Helps to Protect the blower, tractor and operator against surface edge impact damage from steel edge impacts on raised surfaces.*
Most who switch can’t believe they waited this long. Very few ever return to a steel plow edge.
The UHMW is smooth, quiet and a great pavement clearing product.
*The UHMW can absorb some of the impact energy which steel edges won’t. But please understand the danger of running into something solid is always risky and often will damage equipment and could injure the tractor operator. Please be careful…..
A few Questions and Answers about these UHMW wear edges
Q.- How long does it take to change the plow edges on these plows?
A. - It’s very simple and quick. In less than 20 minutes, you can remove the steel edge and replace it with our UHMW wear edge or Kit.
Q. - What’s the difference between a wear edge and a wear edge kit?
A.- Our wear edges are the UHMW with our corrosion resistant hardware. Our Edge KITS are our same edges but shipped with Marine grade stainless hardware.
Q.- Does the UHMW clear the pavement as well as a steel edge?
A.- Actually better, and it does so without scraping, scoring or damaging the pavement surface.
Made in America with American Sourced Components. We make all of our wear edges ourselves in our West Michigan Plant. Thank you for your interest in our products.
Life Expectancy of the normal use of the UHMW Plow wear bars*
Number of residential driveway clearings with these assumptions*
1/2” UHMW Single Sided Wear bar,- 250
1/2” UHMW Double Sided Wear bar-480
3/4” UHMW Single Sided Wear Bar - 390
3/4” UHMW Double Sided Wear Bar - 750
Estimates only, actual results will vary. No guarantees of these results are being implied or made in any way.
These are simply wear estimates based upon proper use of the tractor and implement. Assumptions also include
Assumes using a x7xx garden tractor. Experienced operator.
Residential driveways 25% asphalt and 75% concrete
Average driveway length is 200’, width is 12’ and paved sq footage is 2,700
Assumes using a front quick hitch and down pressure is properly applied.
Wears 85% of possible wear material. Possible wear material is when the edge of the UHMW strap is within 1/8” of plow bottom edge.
The estimates provided are merely estimates based upon measuring actual wear of the product after every 30 driveways. Actual results will be different. No guarantees of results are being made or implied.
Please note, while the UHMW edge is much gentler on pavement than the steel plow edge, the UHMW edge can still remove some pavement patches and repairs due to the UHMW edge being strong enough to grab pavement repairs. If your pavement has crack filling, etc. be careful with the down pressure to avoid removing crack filler and other pavement repairs.
Free Ground Shipping within the USA in the
Lower 48 States via UPS and the USPS
The UHMW Plow Edge is an excellent replacement for the steel plow edge. Our SBS LLC, UHMW Bar and Kits are for the
54” and 60” Deere Front Quick Hitch Plows.
Our Standard UHMW Edge is 1/2” thick UHMW material
Our Commercial UHMW Edge is 3/4” thick UHMW Material
How do I order my UHMW Plow Edge?
Select my plow size from the 54 and 60 buttons
Select the UHMW thickness or Duty, Standard or Commercial. When you click on the different buttons, the different prices are displayed.
Compare the cost for single edge, vrs double edge UHMW wear bars. Check out the estimated wear duration list below for an idea of how long these edges will last.*
Select the Duty and the Single Edge or Double Edge, add to your cart.
Complete your name and shipping information and payment method and we will handle the rest.
Thank You for your interest in our products. Please contact us with any questions.
Sections below with additional information if needed to answer questions or concerns.
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
Cost and Use Example for the 54” Plow
Why do we offer the single sided UHMW wear bars?
Here is why we offer the Double Wear Edge Sided Wear Bars
Range of UHMW Plow Wear Bars Offered
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Why switch to a UHMW Plow Edge?
A few Questions and Answers about these UHMW wear edges
Life Expectancy of the normal use of the UHMW Plow wear bars*
Single Edge, Double Edge UHMW Wear Bars, How Do I Choose?
A choice for every plow owner.
Our Single Edge UHMW Wear bars provide one wear edge. You install the UHMW wear edge and when that wear side is used up, the bar needs to be replaced.
Our Double Wear Edge UHMW Bars provide two complete wear edges, The Double Wear Edge bar can be flipped over when the first side wear bar is exhausted and the second side wear bar provides an entire additional wear bar. When you have used up both sides of the Double Wear Edge, then its replacement time.
Cost and Use Example for the 54” Plow
Single Sided UHMW Wear Bar in 1/2” UHMW sells for $155
Double Sided 1/2” UHMW wear bar sells for $190
When the single sided wear bar is worn out, throw it away and start over. When the double sided wear bar wears down side 1, flip over the UHMW wear bar and start to use side 2. The $190 buys twice the wear life compared to the $155. This is why we offer choices.
Why do we offer the single sided UHMW wear bars?
Because for many residential tractor owners, the single sided UHMW wear bar will last years, some up to 10 years. If the tractor owner plows their drive and little more, why spend $190 for a wear edge which you likely won’t need for many, many years, if at all?
Here is why we offer the Double Wear Edge Sided Wear Bars
Many tractor owners plow just their driveway or theirs and a neighbor or two. I plow 34 drives each time it snow. This winter, I have plowed 25 times since mid November, That means I have cleared 850 drives this year alone.
I am using the Commercial Duty, Double Sided UHMW wear bar as that will likely last me 3 seasons of use even at this level. Different owners have different needs.
I understand than many tractor owners don’t plow their own driveway 34 times a winter, which is what happens when I plow the drives on my route on each snowfall. Different people have different needs. We can make the edge which meets these needs and makes the most sense for each owner. After all, its about providing solutions.
In this case, the Double Edge Wear bars provide twice the wear life for just a slight increase in the cost for the Double Edge Wear bars. This Makes our UHMW Double Edge wear bar an excellent value and best choice for most UHMW Wear bar for the money.
Range of UHMW Plow Wear Bars Offered
We offer these edges in the following combinations for the 54” and 60” Deere Front Quick Hitch Plows at the list of edge options shown below. We offer 8 different plow wear bars for these two plows and also a choice of 2 different hardware types, which means we offer 16 choices for our customers.
Our listing of 54” and 60” Deere Plow UHMW Wear Bars
Wear Bars with Corrosion Resistant Hardware
54” Plow, Single Sided Standard Wear bar with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar, with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar, with 3/4” UHMW
Kits with Marine Grade Stainless Hardware.
54” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW.
54” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
54” Plow, Single Sided Commercial Wear bar KIT with 3/4 UHMW
54” Plow, Double Sided Commercial Wear bar, KIT with 3/4” UHMW
60” Plow, Single Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Double Sided Standard Wear bar KIT with 1/2” UHMW
60” Plow, Single Sided Commercial Wear bar KIT with 3/4” UHMW
60” Plow, Double Sided Commercial Wear bar KIT with 3/4” UHMW
Why switch to a UHMW Plow Edge?
Ends all pavement surface abrasion and damage.
No more rust on the pavement or garage floor
Protects pavement surfaces from asphalt sealer damage and pavement scraping, scuffing and surface abrasion.
Quieter, no more metal banging and scraping on the pavement
UHMW will outlast the mild steel wear edge when used correctly.
Helps to Protect the blower, tractor and operator against surface edge impact damage from steel edge impacts on raised surfaces.*
Most who switch can’t believe they waited this long. Very few ever return to a steel plow edge.
The UHMW is smooth, quiet and a great pavement clearing product.
*The UHMW can absorb some of the impact energy which steel edges won’t. But please understand the danger of running into something solid is always risky and often will damage equipment and could injure the tractor operator. Please be careful…..
A few Questions and Answers about these UHMW wear edges
Q.- How long does it take to change the plow edges on these plows?
A. - It’s very simple and quick. In less than 20 minutes, you can remove the steel edge and replace it with our UHMW wear edge or Kit.
Q. - What’s the difference between a wear edge and a wear edge kit?
A.- Our wear edges are the UHMW with our corrosion resistant hardware. Our Edge KITS are our same edges but shipped with Marine grade stainless hardware.
Q.- Does the UHMW clear the pavement as well as a steel edge?
A.- Actually better, and it does so without scraping, scoring or damaging the pavement surface.
Made in America with American Sourced Components. We make all of our wear edges ourselves in our West Michigan Plant. Thank you for your interest in our products.
Life Expectancy of the normal use of the UHMW Plow wear bars*
Number of residential driveway clearings with these assumptions*
1/2” UHMW Single Sided Wear bar,- 250
1/2” UHMW Double Sided Wear bar-480
3/4” UHMW Single Sided Wear Bar - 390
3/4” UHMW Double Sided Wear Bar - 750
Estimates only, actual results will vary. No guarantees of these results are being implied or made in any way.
These are simply wear estimates based upon proper use of the tractor and implement. Assumptions also include
Assumes using a x7xx garden tractor. Experienced operator.
Residential driveways 25% asphalt and 75% concrete
Average driveway length is 200’, width is 12’ and paved sq footage is 2,700
Assumes using a front quick hitch and down pressure is properly applied.
Wears 85% of possible wear material. Possible wear material is when the edge of the UHMW strap is within 1/8” of plow bottom edge.
The estimates provided are merely estimates based upon measuring actual wear of the product after every 30 driveways. Actual results will be different. No guarantees of results are being made or implied.
Please note, while the UHMW edge is much gentler on pavement than the steel plow edge, the UHMW edge can still remove some pavement patches and repairs due to the UHMW edge being strong enough to grab pavement repairs. If your pavement has crack filling, etc. be careful with the down pressure to avoid removing crack filler and other pavement repairs.