72" CTA Plow, Premium Upgrade Kit, with Rubber Plow Edge and Top Flap kit, Complete
This kit ships FREE, with Ground Delivery in the Lower 48 states.
Upgrade your 72” CTA Plow’s performance and also protect your pavement in the process. This kit replaces either the steel or UHMW Plow edge with a precision cut rubber edge and steel mounting strap, to provide snow clearing capabilities, without the damage to the surface.
Specifically for CTA Plow models PLM-72-JDLM or PL-72-HDJDLM
We custom make the rubber plow edge based your answers to questions we email to you. This assures you get the right plow edge for your needs and to best match to the tractor and equipment being used since these plows are used on larger and heavier tractor than is the CTA 60” and 66” plow. .
Plow Rubber Edge, Mounting Strap and Hardware
Steel plow edges will cause abrasions to the pavement, including scratching and damaging the asphalt surface. Even the UHMW plow edges can remove asphalt repairs such as hot rubber crack filling or any other surface repairs due to their sharp and blunt leading edge. Years of plowing experience have proven to us that to protect the pavement, the rubber edge is the way to go.
Here is how we approach making this edge specifically for your needs and provide the best results.. When you order this plow edge kit, we will contact you via email with some questions about the tractor this plow is used on, the type of surface you will be plowing and similar questions. Based upon your answers, the edge will be assembled to specifically meet your needs and likely between 1.0” and 1.50” in width.
This kit allows you to
remove the steel or UHMW edge and replace it with a laser cut, custom rubber edge
our SBS edges have vertical adjustment, as the edge is used.
our SBS edges are matched to the weight of the plow and tractor for best results.
your rubber edge will be 1” thick to 1.50” thick based upon your specific need.
our SBS rubber plow edges are reversible and offer two wear edges
.Our Premium Upgrade Kits are specifically designed to
Eliminate the banging noise when using a plow with a steel edge.
Protect the pavement against surface damage from abrasion
Allow vertical plow edge adjustment in increments to get the best use of the plow edge.
Increase the plow safety on uneven surfaces when using the rubber edge and following direction..
Plow from pavement, to lawn surfaces or transition between gravel and other surfaces without displacing material.
Push snow off the pavement into the lawn without sprinkler head, control valve damage when used as directed.
Our custom mounting straps provide optimal clamping strength.
Owner chosen strap colors to match their equipment if desired.
SBS uses corrosion resistant zinc hardware or Hot Dipped Galvanized Hardware
An upgrade to Stainless hardware is available at an additional cost.
Precision fit for Quick and Easy installation.
Plow Top Flap, Mounting Strap and Hardware
Our plow top flap kit is the next step in enhancing your plow’s total performance. A well designed and constructed plow top flap helps achieve the following advantages;
It keeps the snow off the operator on open station equipment for maximum visibility and to help remain more comfortable. Clearing the snow is one thing, wearing it in the process, is another.
For those clearing snow with a cabbed machine, the top flap keeps the windshield clear and visibility better for your snow clearing activities.
The top flap rolls the snow ahead of the plow for improved clearing efficiency*.
The top flap also can throw the snow off the end of the angled moldboard more effectively*, which helps to keep the snow banks further back from the plowing surface.
Those who have plowed with a top flap on their plows, generally always use a top flap in the future it enhances the plows operation and function.
Our plow top flap is custom built for this plow, to make installation a breeze. The mounting holes are all laser cut and the Steel top flap mounting strap is laser cut to accept special corrosion resistant carriage bolt hardware with flange lock nuts .
Complete, Premium 72” CTA Plow Upgrade Kit
Our plow upgrade kit includes everything needed to install the custom rubber edge on the plow as well as the plow’s top flap. This is a Top Quality commercial grade kit, designed to provide seasons of reliable performance for your CTA Front End Loader mounted plow. All parts described above are included in this kit, making it a complete upgrade kit for your plow.
This kit ships FREE, with Ground Delivery in the Lower 48 states.
Upgrade your 72” CTA Plow’s performance and also protect your pavement in the process. This kit replaces either the steel or UHMW Plow edge with a precision cut rubber edge and steel mounting strap, to provide snow clearing capabilities, without the damage to the surface.
Specifically for CTA Plow models PLM-72-JDLM or PL-72-HDJDLM
We custom make the rubber plow edge based your answers to questions we email to you. This assures you get the right plow edge for your needs and to best match to the tractor and equipment being used since these plows are used on larger and heavier tractor than is the CTA 60” and 66” plow. .
Plow Rubber Edge, Mounting Strap and Hardware
Steel plow edges will cause abrasions to the pavement, including scratching and damaging the asphalt surface. Even the UHMW plow edges can remove asphalt repairs such as hot rubber crack filling or any other surface repairs due to their sharp and blunt leading edge. Years of plowing experience have proven to us that to protect the pavement, the rubber edge is the way to go.
Here is how we approach making this edge specifically for your needs and provide the best results.. When you order this plow edge kit, we will contact you via email with some questions about the tractor this plow is used on, the type of surface you will be plowing and similar questions. Based upon your answers, the edge will be assembled to specifically meet your needs and likely between 1.0” and 1.50” in width.
This kit allows you to
remove the steel or UHMW edge and replace it with a laser cut, custom rubber edge
our SBS edges have vertical adjustment, as the edge is used.
our SBS edges are matched to the weight of the plow and tractor for best results.
your rubber edge will be 1” thick to 1.50” thick based upon your specific need.
our SBS rubber plow edges are reversible and offer two wear edges
.Our Premium Upgrade Kits are specifically designed to
Eliminate the banging noise when using a plow with a steel edge.
Protect the pavement against surface damage from abrasion
Allow vertical plow edge adjustment in increments to get the best use of the plow edge.
Increase the plow safety on uneven surfaces when using the rubber edge and following direction..
Plow from pavement, to lawn surfaces or transition between gravel and other surfaces without displacing material.
Push snow off the pavement into the lawn without sprinkler head, control valve damage when used as directed.
Our custom mounting straps provide optimal clamping strength.
Owner chosen strap colors to match their equipment if desired.
SBS uses corrosion resistant zinc hardware or Hot Dipped Galvanized Hardware
An upgrade to Stainless hardware is available at an additional cost.
Precision fit for Quick and Easy installation.
Plow Top Flap, Mounting Strap and Hardware
Our plow top flap kit is the next step in enhancing your plow’s total performance. A well designed and constructed plow top flap helps achieve the following advantages;
It keeps the snow off the operator on open station equipment for maximum visibility and to help remain more comfortable. Clearing the snow is one thing, wearing it in the process, is another.
For those clearing snow with a cabbed machine, the top flap keeps the windshield clear and visibility better for your snow clearing activities.
The top flap rolls the snow ahead of the plow for improved clearing efficiency*.
The top flap also can throw the snow off the end of the angled moldboard more effectively*, which helps to keep the snow banks further back from the plowing surface.
Those who have plowed with a top flap on their plows, generally always use a top flap in the future it enhances the plows operation and function.
Our plow top flap is custom built for this plow, to make installation a breeze. The mounting holes are all laser cut and the Steel top flap mounting strap is laser cut to accept special corrosion resistant carriage bolt hardware with flange lock nuts .
Complete, Premium 72” CTA Plow Upgrade Kit
Our plow upgrade kit includes everything needed to install the custom rubber edge on the plow as well as the plow’s top flap. This is a Top Quality commercial grade kit, designed to provide seasons of reliable performance for your CTA Front End Loader mounted plow. All parts described above are included in this kit, making it a complete upgrade kit for your plow.
This kit ships FREE, with Ground Delivery in the Lower 48 states.
Upgrade your 72” CTA Plow’s performance and also protect your pavement in the process. This kit replaces either the steel or UHMW Plow edge with a precision cut rubber edge and steel mounting strap, to provide snow clearing capabilities, without the damage to the surface.
Specifically for CTA Plow models PLM-72-JDLM or PL-72-HDJDLM
We custom make the rubber plow edge based your answers to questions we email to you. This assures you get the right plow edge for your needs and to best match to the tractor and equipment being used since these plows are used on larger and heavier tractor than is the CTA 60” and 66” plow. .
Plow Rubber Edge, Mounting Strap and Hardware
Steel plow edges will cause abrasions to the pavement, including scratching and damaging the asphalt surface. Even the UHMW plow edges can remove asphalt repairs such as hot rubber crack filling or any other surface repairs due to their sharp and blunt leading edge. Years of plowing experience have proven to us that to protect the pavement, the rubber edge is the way to go.
Here is how we approach making this edge specifically for your needs and provide the best results.. When you order this plow edge kit, we will contact you via email with some questions about the tractor this plow is used on, the type of surface you will be plowing and similar questions. Based upon your answers, the edge will be assembled to specifically meet your needs and likely between 1.0” and 1.50” in width.
This kit allows you to
remove the steel or UHMW edge and replace it with a laser cut, custom rubber edge
our SBS edges have vertical adjustment, as the edge is used.
our SBS edges are matched to the weight of the plow and tractor for best results.
your rubber edge will be 1” thick to 1.50” thick based upon your specific need.
our SBS rubber plow edges are reversible and offer two wear edges
.Our Premium Upgrade Kits are specifically designed to
Eliminate the banging noise when using a plow with a steel edge.
Protect the pavement against surface damage from abrasion
Allow vertical plow edge adjustment in increments to get the best use of the plow edge.
Increase the plow safety on uneven surfaces when using the rubber edge and following direction..
Plow from pavement, to lawn surfaces or transition between gravel and other surfaces without displacing material.
Push snow off the pavement into the lawn without sprinkler head, control valve damage when used as directed.
Our custom mounting straps provide optimal clamping strength.
Owner chosen strap colors to match their equipment if desired.
SBS uses corrosion resistant zinc hardware or Hot Dipped Galvanized Hardware
An upgrade to Stainless hardware is available at an additional cost.
Precision fit for Quick and Easy installation.
Plow Top Flap, Mounting Strap and Hardware
Our plow top flap kit is the next step in enhancing your plow’s total performance. A well designed and constructed plow top flap helps achieve the following advantages;
It keeps the snow off the operator on open station equipment for maximum visibility and to help remain more comfortable. Clearing the snow is one thing, wearing it in the process, is another.
For those clearing snow with a cabbed machine, the top flap keeps the windshield clear and visibility better for your snow clearing activities.
The top flap rolls the snow ahead of the plow for improved clearing efficiency*.
The top flap also can throw the snow off the end of the angled moldboard more effectively*, which helps to keep the snow banks further back from the plowing surface.
Those who have plowed with a top flap on their plows, generally always use a top flap in the future it enhances the plows operation and function.
Our plow top flap is custom built for this plow, to make installation a breeze. The mounting holes are all laser cut and the Steel top flap mounting strap is laser cut to accept special corrosion resistant carriage bolt hardware with flange lock nuts .
Complete, Premium 72” CTA Plow Upgrade Kit
Our plow upgrade kit includes everything needed to install the custom rubber edge on the plow as well as the plow’s top flap. This is a Top Quality commercial grade kit, designed to provide seasons of reliable performance for your CTA Front End Loader mounted plow. All parts described above are included in this kit, making it a complete upgrade kit for your plow.
This product is custom made when ordered by our customers. There are variables based upon how our client use their 72 CTA plow such as the type of surface being cleared, the size of the tractor on which the plow is used. We send these questions to our customers and match the best products for their needs. When you order this kit and pay for it on the site, you are put into our production schedule and we advise you of the estimated delivery date, We keep you posted and notify you of the kits ship date and provide the tracking information for your use. Thank you for your interest in our products.