60" Deere Plow, MD400 Hardened Steel Plow Edge, replaces Deere M148378
Includes Free Shipping via Ground Delivery in USA Lower 48
Laser cut to precision, this PREMIUM plow edge replaces OEM edge number M148378 with a superior edge made of AR400F, an abrasion-resistant brand of steel with a hardness of 450 bhn. This brand of abrasion resistant plate is intended for higher, impact, wear applications.
Simple facts are our
We sell our plow edge to replace the OEM Deere plow edge part number M148378 with a plow edge which is significantly better then the OEM edge and the replacement Deere sells.
Our Severe Duty, Wear resistant plow edge, sells for $189 which includes a set of corrosion resistant hardware in the kit price, where others charge extra.
Deere’s List price is $194.59 for a Mild Steel plow edge and they don’t include the hardware. The charge more for an edge of lower quality and they don’t include the hardware to install it.
Our Edge is made from MD400 Hardened Steel, which is a purpose built, wear resistant steel which will last 4 to 6 times longer than the Deere OEM edge.
In normal residential plow use, our MD400 edge could be the last steel plow edge you need to purchase. The wear resistant steel is specially hardened to resist abrasion and to outlast mild steel with 4 to 6 times the useful life.
Our parts ALWAYS ship FREE via Ground Delivery in the lower 48 states.
This is an actual abrasion resistant steel plow wear edge, which is 1/4” thick and will outlast the OEM Deere steel edge by 4 to 6 times.
Why buy the OEM Part which is mild steel, when it costs MORE than this edge which will last 4 to 5 times longer?
Laser Cut to fit your plow precisely, if you are looking for the best, long lasting and durable STEEL wear edge for your plow, this is the one you want. Shipped in a solid length for maximum strength and to produce the best snow clearing results.
If you want the best steel snow plow edge for your 60” Deere front mounted plow on the Quik Tach hitch, this is the best steel plow edge there is.
Are you looking for the Stainess Steel Plow Mounting Hardware to mount this edge on your plow? We offer the Stainless Hardware, with locking nuts in a kit to install this plow edge. Please see the hardware listings for details.
A few important points to consider before ordering;
This edge is for the front mounted Deere 60” snow plows which are mounted on the front Quick Tach Hitch. If your plow is mounted on the 120R, H120 or other Front End Loader mounted frames, this edge will NOT fit your plow.
For years, Deere made the 54” and 60” front mounted snow plows in Deere Yellow only. In the last few years, they have begun to paint the new plows green. This edge will fit the 60” Deere front mounted plows, regardless if they are Yellow or Green in color, as long as the plow is mounted on the front Quik Tach Hitch.
If your front plow is NOT on a Deere Quik Tach Hitch, this edge will not fit.
The 54” and 60” front plows are the most common snow plows sold on the Deere Garden tractors, SCUTS and CUTS. If you are unsure if your plow will accept this plow wear edge, please send us a picture of the front and rear of the plow and we can tell you whether this edge will fit your plow.
This edge does NOT fit Frontier Plows whether they are front mounted or 3ph hitch mounted. We do offer the same MD400 edge for Frontier Plows in all sizes.
We custom make parts for snow clearing implements and other parts, everyday. Even if this isn’t the part for your plow, snow pusher or snow blower, we can make the right part for you. Please contact us and we will help you get what you need.
Please note, this steel wear edge will cause surface damage to asphalt surfaces when used with excessive down force on the plow edge. If you have a pavement surface which you need to protect from damage, please consider one of our rubber plow edges or a carefully used UHMW plastic plow edge.
This abrasion resistant edge is powder coated black to help protect the edge from rust and corrosion. Of course, the actual bottom edge of the Plow wear edge is going to wear off the black powder coating with use, but the remainder of the edge will keep an nice finish on the plow edge and turn your Deere plow into a real snow plowing machine.
You will be impressed at the durability and wear resistance of this purpose made plow edge. It’s a significant improvement over the OEM edge. With normal residential plow use, this plow edge will last many years and might even be the last steel edge you have to buy.
Includes Free Shipping via Ground Delivery in USA Lower 48
Laser cut to precision, this PREMIUM plow edge replaces OEM edge number M148378 with a superior edge made of AR400F, an abrasion-resistant brand of steel with a hardness of 450 bhn. This brand of abrasion resistant plate is intended for higher, impact, wear applications.
Simple facts are our
We sell our plow edge to replace the OEM Deere plow edge part number M148378 with a plow edge which is significantly better then the OEM edge and the replacement Deere sells.
Our Severe Duty, Wear resistant plow edge, sells for $189 which includes a set of corrosion resistant hardware in the kit price, where others charge extra.
Deere’s List price is $194.59 for a Mild Steel plow edge and they don’t include the hardware. The charge more for an edge of lower quality and they don’t include the hardware to install it.
Our Edge is made from MD400 Hardened Steel, which is a purpose built, wear resistant steel which will last 4 to 6 times longer than the Deere OEM edge.
In normal residential plow use, our MD400 edge could be the last steel plow edge you need to purchase. The wear resistant steel is specially hardened to resist abrasion and to outlast mild steel with 4 to 6 times the useful life.
Our parts ALWAYS ship FREE via Ground Delivery in the lower 48 states.
This is an actual abrasion resistant steel plow wear edge, which is 1/4” thick and will outlast the OEM Deere steel edge by 4 to 6 times.
Why buy the OEM Part which is mild steel, when it costs MORE than this edge which will last 4 to 5 times longer?
Laser Cut to fit your plow precisely, if you are looking for the best, long lasting and durable STEEL wear edge for your plow, this is the one you want. Shipped in a solid length for maximum strength and to produce the best snow clearing results.
If you want the best steel snow plow edge for your 60” Deere front mounted plow on the Quik Tach hitch, this is the best steel plow edge there is.
Are you looking for the Stainess Steel Plow Mounting Hardware to mount this edge on your plow? We offer the Stainless Hardware, with locking nuts in a kit to install this plow edge. Please see the hardware listings for details.
A few important points to consider before ordering;
This edge is for the front mounted Deere 60” snow plows which are mounted on the front Quick Tach Hitch. If your plow is mounted on the 120R, H120 or other Front End Loader mounted frames, this edge will NOT fit your plow.
For years, Deere made the 54” and 60” front mounted snow plows in Deere Yellow only. In the last few years, they have begun to paint the new plows green. This edge will fit the 60” Deere front mounted plows, regardless if they are Yellow or Green in color, as long as the plow is mounted on the front Quik Tach Hitch.
If your front plow is NOT on a Deere Quik Tach Hitch, this edge will not fit.
The 54” and 60” front plows are the most common snow plows sold on the Deere Garden tractors, SCUTS and CUTS. If you are unsure if your plow will accept this plow wear edge, please send us a picture of the front and rear of the plow and we can tell you whether this edge will fit your plow.
This edge does NOT fit Frontier Plows whether they are front mounted or 3ph hitch mounted. We do offer the same MD400 edge for Frontier Plows in all sizes.
We custom make parts for snow clearing implements and other parts, everyday. Even if this isn’t the part for your plow, snow pusher or snow blower, we can make the right part for you. Please contact us and we will help you get what you need.
Please note, this steel wear edge will cause surface damage to asphalt surfaces when used with excessive down force on the plow edge. If you have a pavement surface which you need to protect from damage, please consider one of our rubber plow edges or a carefully used UHMW plastic plow edge.
This abrasion resistant edge is powder coated black to help protect the edge from rust and corrosion. Of course, the actual bottom edge of the Plow wear edge is going to wear off the black powder coating with use, but the remainder of the edge will keep an nice finish on the plow edge and turn your Deere plow into a real snow plowing machine.
You will be impressed at the durability and wear resistance of this purpose made plow edge. It’s a significant improvement over the OEM edge. With normal residential plow use, this plow edge will last many years and might even be the last steel edge you have to buy.
Includes Free Shipping via Ground Delivery in USA Lower 48
Laser cut to precision, this PREMIUM plow edge replaces OEM edge number M148378 with a superior edge made of AR400F, an abrasion-resistant brand of steel with a hardness of 450 bhn. This brand of abrasion resistant plate is intended for higher, impact, wear applications.
Simple facts are our
We sell our plow edge to replace the OEM Deere plow edge part number M148378 with a plow edge which is significantly better then the OEM edge and the replacement Deere sells.
Our Severe Duty, Wear resistant plow edge, sells for $189 which includes a set of corrosion resistant hardware in the kit price, where others charge extra.
Deere’s List price is $194.59 for a Mild Steel plow edge and they don’t include the hardware. The charge more for an edge of lower quality and they don’t include the hardware to install it.
Our Edge is made from MD400 Hardened Steel, which is a purpose built, wear resistant steel which will last 4 to 6 times longer than the Deere OEM edge.
In normal residential plow use, our MD400 edge could be the last steel plow edge you need to purchase. The wear resistant steel is specially hardened to resist abrasion and to outlast mild steel with 4 to 6 times the useful life.
Our parts ALWAYS ship FREE via Ground Delivery in the lower 48 states.
This is an actual abrasion resistant steel plow wear edge, which is 1/4” thick and will outlast the OEM Deere steel edge by 4 to 6 times.
Why buy the OEM Part which is mild steel, when it costs MORE than this edge which will last 4 to 5 times longer?
Laser Cut to fit your plow precisely, if you are looking for the best, long lasting and durable STEEL wear edge for your plow, this is the one you want. Shipped in a solid length for maximum strength and to produce the best snow clearing results.
If you want the best steel snow plow edge for your 60” Deere front mounted plow on the Quik Tach hitch, this is the best steel plow edge there is.
Are you looking for the Stainess Steel Plow Mounting Hardware to mount this edge on your plow? We offer the Stainless Hardware, with locking nuts in a kit to install this plow edge. Please see the hardware listings for details.
A few important points to consider before ordering;
This edge is for the front mounted Deere 60” snow plows which are mounted on the front Quick Tach Hitch. If your plow is mounted on the 120R, H120 or other Front End Loader mounted frames, this edge will NOT fit your plow.
For years, Deere made the 54” and 60” front mounted snow plows in Deere Yellow only. In the last few years, they have begun to paint the new plows green. This edge will fit the 60” Deere front mounted plows, regardless if they are Yellow or Green in color, as long as the plow is mounted on the front Quik Tach Hitch.
If your front plow is NOT on a Deere Quik Tach Hitch, this edge will not fit.
The 54” and 60” front plows are the most common snow plows sold on the Deere Garden tractors, SCUTS and CUTS. If you are unsure if your plow will accept this plow wear edge, please send us a picture of the front and rear of the plow and we can tell you whether this edge will fit your plow.
This edge does NOT fit Frontier Plows whether they are front mounted or 3ph hitch mounted. We do offer the same MD400 edge for Frontier Plows in all sizes.
We custom make parts for snow clearing implements and other parts, everyday. Even if this isn’t the part for your plow, snow pusher or snow blower, we can make the right part for you. Please contact us and we will help you get what you need.
Please note, this steel wear edge will cause surface damage to asphalt surfaces when used with excessive down force on the plow edge. If you have a pavement surface which you need to protect from damage, please consider one of our rubber plow edges or a carefully used UHMW plastic plow edge.
This abrasion resistant edge is powder coated black to help protect the edge from rust and corrosion. Of course, the actual bottom edge of the Plow wear edge is going to wear off the black powder coating with use, but the remainder of the edge will keep an nice finish on the plow edge and turn your Deere plow into a real snow plowing machine.
You will be impressed at the durability and wear resistance of this purpose made plow edge. It’s a significant improvement over the OEM edge. With normal residential plow use, this plow edge will last many years and might even be the last steel edge you have to buy.
The OEM Plow edge is made of Mild Steel and weighs about 15 pounds. Our specialty produced, Hardened Steel Plow Edge weighs nearly 50% more, and its also designed to resist the abrasion of using the plow on hard surfaces. This edge comes with new hardware which is also coated to resist corrosion. Used in normal driveway clearing applications, this very well could be the last snow plow edge you ever buy for this plow………..