BigToolRack 66", 72', 84" and 90" Plow Standard Duty Rubber Edge Kit
Free Ground Shipping is Included to the lower 48 states
Our Standard Duty Blade Edge kit for the BigToolRack snow blade is a rubber edge designed to completely replace the steel edge on your plow.
Our Blade Edge Kit includes the following for your BigToolRack Blade;
A laser cut rubber edge which perfectly fits the blade
A custom made UHMW or Metal strap to secure the rubber edge to the blade and allow easy adjustment of the blade edge with use.
All corrosion resistant specialty hardware to easily install the kit on your blade.
For the 66” BTR front end loader mounted plow, Our Standard Duty Rubber Edge Kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 72” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 84” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
(2) 6” tall x 1/2” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 90” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
8” tall x 1” thick rubber plow edge, professionally machined for optimal fit
Steel Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
Our Standard Duty Rubber Plow edge kit replaces the steel plow edge on your blade. Replacing the steel wear edge on your plow has the following immediate benefits
Our Plow Edge Kits are complete with all hardware, instructions and the parts are all machined for perfect fit. No need to cut, drill or grind on anything like most others.
No more surface grinding or abrasion.
Stops damage to the asphalt sealer and top level surface.
No more rust on the pavement, No more banging when the plow edge catches an expansion joint or other elevated pavement surface.
Quiet, smooth snow clearing without the pavement abrasion and banging noises of the steel plow edge
Clears the moisture from the pavement and allows the pavement to dry more quickly. This prevents ice build up and helps clear the pavement more efficiently.
Removing the moisture from the pavement reduces water in the pavement cracks, which leads to freeze and thaw cycles and pavement damage.
The rubber plow edge handles pavement transition far better and safer. The blade trips less as the rubber edge will pass over the small height variations where the steel edge won’t.
Installation Time to Install our plow edge kit
20 to 40 minutes for most operators, can be longer for plows with extensive use history.
Uses Basic Hand tools
Our Kit uses all SAE Hardware for easy installation
Customers LOVE the rubber plow edges and UHMW plow edges and never want to return to the steel wear edge.
Expected Wear Duration
for our Standard Duty Kits is 400 to 500 typical residential driveways. That’s a drive which is >300’ in length, >14’ in width and total pavement area of 5,500 sq ft. Most homeowners plowing their own driveway and one or two neighbors will find our Standard Duty Rubber Plow edge will last for 800 to 1,000 residential drives. I have used these same edges and achieved 1,500 residential drives with this same wear edge.
All of our Rubber and UHMW PlowWear edges are Double sided, so you can flip over the wear edge and double the wear life of the plow. Avoid excessive down pressure and extend the plows wear life.
Our blade edge kit is a very durable rubber which is designed to quietly clear the pavement. It eliminates the banging and scraping of the blade on the pavement. It also prevents damage to the pavement surface, so it won't scrape the asphalt sealer or surface nor will it harm the concrete surface. We use this edge on asphalt, concrete, brick pavers, imprinted concrete, even exterior ceramic tile. Customers who switch to this edge love it.
Other Enhancements or Upgrade kits we offer to our BigToolRack Blade customers include
A Top Flap Kit to add a top flap to the blade to improve blade function.
Our UHMW Plow Edge for those who want to protect the pavement yet still need to scrape ice and hard pack snow off the pavement. If your snow is usually driven over before its plowed, consider our UHMW edge kit.
We offer Marine Grade Stainless Steel Hardware as an upgrade on any kit, but its included with our Extreme Duty Kits’
We also offer Heavy Duty Rubber Plow edge kits and our Extreme Duty edge Kit, for those who want the very best and who demand their plow be equipped with the most durable edge which will provide a very long wear life. We also offer UHMW Plow edge Kits in Standard Duty and Commercial Grade kits for extended wear life.
Free Ground Shipping is Included to the lower 48 states
Our Standard Duty Blade Edge kit for the BigToolRack snow blade is a rubber edge designed to completely replace the steel edge on your plow.
Our Blade Edge Kit includes the following for your BigToolRack Blade;
A laser cut rubber edge which perfectly fits the blade
A custom made UHMW or Metal strap to secure the rubber edge to the blade and allow easy adjustment of the blade edge with use.
All corrosion resistant specialty hardware to easily install the kit on your blade.
For the 66” BTR front end loader mounted plow, Our Standard Duty Rubber Edge Kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 72” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 84” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
(2) 6” tall x 1/2” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 90” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
8” tall x 1” thick rubber plow edge, professionally machined for optimal fit
Steel Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
Our Standard Duty Rubber Plow edge kit replaces the steel plow edge on your blade. Replacing the steel wear edge on your plow has the following immediate benefits
Our Plow Edge Kits are complete with all hardware, instructions and the parts are all machined for perfect fit. No need to cut, drill or grind on anything like most others.
No more surface grinding or abrasion.
Stops damage to the asphalt sealer and top level surface.
No more rust on the pavement, No more banging when the plow edge catches an expansion joint or other elevated pavement surface.
Quiet, smooth snow clearing without the pavement abrasion and banging noises of the steel plow edge
Clears the moisture from the pavement and allows the pavement to dry more quickly. This prevents ice build up and helps clear the pavement more efficiently.
Removing the moisture from the pavement reduces water in the pavement cracks, which leads to freeze and thaw cycles and pavement damage.
The rubber plow edge handles pavement transition far better and safer. The blade trips less as the rubber edge will pass over the small height variations where the steel edge won’t.
Installation Time to Install our plow edge kit
20 to 40 minutes for most operators, can be longer for plows with extensive use history.
Uses Basic Hand tools
Our Kit uses all SAE Hardware for easy installation
Customers LOVE the rubber plow edges and UHMW plow edges and never want to return to the steel wear edge.
Expected Wear Duration
for our Standard Duty Kits is 400 to 500 typical residential driveways. That’s a drive which is >300’ in length, >14’ in width and total pavement area of 5,500 sq ft. Most homeowners plowing their own driveway and one or two neighbors will find our Standard Duty Rubber Plow edge will last for 800 to 1,000 residential drives. I have used these same edges and achieved 1,500 residential drives with this same wear edge.
All of our Rubber and UHMW PlowWear edges are Double sided, so you can flip over the wear edge and double the wear life of the plow. Avoid excessive down pressure and extend the plows wear life.
Our blade edge kit is a very durable rubber which is designed to quietly clear the pavement. It eliminates the banging and scraping of the blade on the pavement. It also prevents damage to the pavement surface, so it won't scrape the asphalt sealer or surface nor will it harm the concrete surface. We use this edge on asphalt, concrete, brick pavers, imprinted concrete, even exterior ceramic tile. Customers who switch to this edge love it.
Other Enhancements or Upgrade kits we offer to our BigToolRack Blade customers include
A Top Flap Kit to add a top flap to the blade to improve blade function.
Our UHMW Plow Edge for those who want to protect the pavement yet still need to scrape ice and hard pack snow off the pavement. If your snow is usually driven over before its plowed, consider our UHMW edge kit.
We offer Marine Grade Stainless Steel Hardware as an upgrade on any kit, but its included with our Extreme Duty Kits’
We also offer Heavy Duty Rubber Plow edge kits and our Extreme Duty edge Kit, for those who want the very best and who demand their plow be equipped with the most durable edge which will provide a very long wear life. We also offer UHMW Plow edge Kits in Standard Duty and Commercial Grade kits for extended wear life.
Free Ground Shipping is Included to the lower 48 states
Our Standard Duty Blade Edge kit for the BigToolRack snow blade is a rubber edge designed to completely replace the steel edge on your plow.
Our Blade Edge Kit includes the following for your BigToolRack Blade;
A laser cut rubber edge which perfectly fits the blade
A custom made UHMW or Metal strap to secure the rubber edge to the blade and allow easy adjustment of the blade edge with use.
All corrosion resistant specialty hardware to easily install the kit on your blade.
For the 66” BTR front end loader mounted plow, Our Standard Duty Rubber Edge Kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 72” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
6” tall x 3/4” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 84” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
(2) 6” tall x 1/2” thick rubber plow edge, professionally machined for optimal fit
UHMW Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
For the 90” BTR Front End Loader mounted Plow, our Standard Duty rubber Plow Edge kit includes
8” tall x 1” thick rubber plow edge, professionally machined for optimal fit
Steel Strap to secure the Rubber Plow edge on the BTR plow
Full Set of Corrosion Resistant hardware including carriage bolts, washers and Nylock nuts.
Our Standard Duty Rubber Plow edge kit replaces the steel plow edge on your blade. Replacing the steel wear edge on your plow has the following immediate benefits
Our Plow Edge Kits are complete with all hardware, instructions and the parts are all machined for perfect fit. No need to cut, drill or grind on anything like most others.
No more surface grinding or abrasion.
Stops damage to the asphalt sealer and top level surface.
No more rust on the pavement, No more banging when the plow edge catches an expansion joint or other elevated pavement surface.
Quiet, smooth snow clearing without the pavement abrasion and banging noises of the steel plow edge
Clears the moisture from the pavement and allows the pavement to dry more quickly. This prevents ice build up and helps clear the pavement more efficiently.
Removing the moisture from the pavement reduces water in the pavement cracks, which leads to freeze and thaw cycles and pavement damage.
The rubber plow edge handles pavement transition far better and safer. The blade trips less as the rubber edge will pass over the small height variations where the steel edge won’t.
Installation Time to Install our plow edge kit
20 to 40 minutes for most operators, can be longer for plows with extensive use history.
Uses Basic Hand tools
Our Kit uses all SAE Hardware for easy installation
Customers LOVE the rubber plow edges and UHMW plow edges and never want to return to the steel wear edge.
Expected Wear Duration
for our Standard Duty Kits is 400 to 500 typical residential driveways. That’s a drive which is >300’ in length, >14’ in width and total pavement area of 5,500 sq ft. Most homeowners plowing their own driveway and one or two neighbors will find our Standard Duty Rubber Plow edge will last for 800 to 1,000 residential drives. I have used these same edges and achieved 1,500 residential drives with this same wear edge.
All of our Rubber and UHMW PlowWear edges are Double sided, so you can flip over the wear edge and double the wear life of the plow. Avoid excessive down pressure and extend the plows wear life.
Our blade edge kit is a very durable rubber which is designed to quietly clear the pavement. It eliminates the banging and scraping of the blade on the pavement. It also prevents damage to the pavement surface, so it won't scrape the asphalt sealer or surface nor will it harm the concrete surface. We use this edge on asphalt, concrete, brick pavers, imprinted concrete, even exterior ceramic tile. Customers who switch to this edge love it.
Other Enhancements or Upgrade kits we offer to our BigToolRack Blade customers include
A Top Flap Kit to add a top flap to the blade to improve blade function.
Our UHMW Plow Edge for those who want to protect the pavement yet still need to scrape ice and hard pack snow off the pavement. If your snow is usually driven over before its plowed, consider our UHMW edge kit.
We offer Marine Grade Stainless Steel Hardware as an upgrade on any kit, but its included with our Extreme Duty Kits’
We also offer Heavy Duty Rubber Plow edge kits and our Extreme Duty edge Kit, for those who want the very best and who demand their plow be equipped with the most durable edge which will provide a very long wear life. We also offer UHMW Plow edge Kits in Standard Duty and Commercial Grade kits for extended wear life.
Some kits are made when ordered, so please allow 14 business days for production before shipping. Thank you for your interest in our products. We sincerely appreciate your business.