BigToolRack 66-90" Snow Blade Extreme Duty Blade Enhancement Kit
Includes FREE Ground Shipping in the lower 48 states in the USA
This product is designed for those with Severe plowing conditions and Extreme Snow Blade use in corrosive and difficult environments. Medical centers, Municipal buildings and any facility which uses snow melt materials and clears snow for heavy pedestrian traffic, will find this kit is designed to provide the best results and the longest functional life.
Our Extreme Duty Blade Enhancement Kit includes the following
Custom laser cut, double edge and double thickness rubber plow edge material to provide extraordinary snow clearing results.
This rubber plow edge is comprised of (2) rubber edges mounted together, which are each 1/2" thick. This provides a total of 1" of edge clearing material for pavement cleaning coverage as well as the additional edge thickness to endure very heavy and frequent use.
UHMW Mounting strap for both the blades edge and the top flap. Our UHMW is double the thickness of our steel strap for maximum binding strength. This material is also corrosion proof.
Our Top Flap kit is included to enhance the blade's production, reduce snow pushing over the top of the blade and direct snow furthest off the end of the snow blade when angled during blade use.
All of the kit hardware is Stainless Steel, to be as corrosion resistant as possible. All hardware is selected for locking the blade edge and top flap on the blade. Yet we also select the hardware to assures blade edge adjustments for wear and flipping the blade edges is easy as the hardware won't rust.
This Extreme Duty Kit has 25% more blade edge material thickness and 100% more mounting strap thickness for maximum durability.
Using the paired rubber blade edges, provides 2 pairs of rubber edges on each plowing pass clearing the pavement. This is more effective at cleaning the pavement than 1 single blade edge.
This kit is designed for use in areas where snow melt material is heavily applied and used and will impact the snow clearing equipment.
This is also designed for heavy and frequent snow blade use. This kit could endure daily use during the winter based upon how its constructed.
Please see our other BigToolRack Snow Blade products for other options and alternatives.
A special note about Stainless Steel Hardware. Stainless Hardware is very strong and can be difficult to remove if galling or cold welding of the hardware occurs from improper use. To get the best results with stainless hardware, the following use tips should be heeded.
Always lubricate the hardware with silicone before installing or removing the hardware.
Avoid using impact tools and "buzzing" the hardware on and off the blade.
Do not over tighten as it doesn't increase clamping strength
Includes FREE Ground Shipping in the lower 48 states in the USA
This product is designed for those with Severe plowing conditions and Extreme Snow Blade use in corrosive and difficult environments. Medical centers, Municipal buildings and any facility which uses snow melt materials and clears snow for heavy pedestrian traffic, will find this kit is designed to provide the best results and the longest functional life.
Our Extreme Duty Blade Enhancement Kit includes the following
Custom laser cut, double edge and double thickness rubber plow edge material to provide extraordinary snow clearing results.
This rubber plow edge is comprised of (2) rubber edges mounted together, which are each 1/2" thick. This provides a total of 1" of edge clearing material for pavement cleaning coverage as well as the additional edge thickness to endure very heavy and frequent use.
UHMW Mounting strap for both the blades edge and the top flap. Our UHMW is double the thickness of our steel strap for maximum binding strength. This material is also corrosion proof.
Our Top Flap kit is included to enhance the blade's production, reduce snow pushing over the top of the blade and direct snow furthest off the end of the snow blade when angled during blade use.
All of the kit hardware is Stainless Steel, to be as corrosion resistant as possible. All hardware is selected for locking the blade edge and top flap on the blade. Yet we also select the hardware to assures blade edge adjustments for wear and flipping the blade edges is easy as the hardware won't rust.
This Extreme Duty Kit has 25% more blade edge material thickness and 100% more mounting strap thickness for maximum durability.
Using the paired rubber blade edges, provides 2 pairs of rubber edges on each plowing pass clearing the pavement. This is more effective at cleaning the pavement than 1 single blade edge.
This kit is designed for use in areas where snow melt material is heavily applied and used and will impact the snow clearing equipment.
This is also designed for heavy and frequent snow blade use. This kit could endure daily use during the winter based upon how its constructed.
Please see our other BigToolRack Snow Blade products for other options and alternatives.
A special note about Stainless Steel Hardware. Stainless Hardware is very strong and can be difficult to remove if galling or cold welding of the hardware occurs from improper use. To get the best results with stainless hardware, the following use tips should be heeded.
Always lubricate the hardware with silicone before installing or removing the hardware.
Avoid using impact tools and "buzzing" the hardware on and off the blade.
Do not over tighten as it doesn't increase clamping strength
Includes FREE Ground Shipping in the lower 48 states in the USA
This product is designed for those with Severe plowing conditions and Extreme Snow Blade use in corrosive and difficult environments. Medical centers, Municipal buildings and any facility which uses snow melt materials and clears snow for heavy pedestrian traffic, will find this kit is designed to provide the best results and the longest functional life.
Our Extreme Duty Blade Enhancement Kit includes the following
Custom laser cut, double edge and double thickness rubber plow edge material to provide extraordinary snow clearing results.
This rubber plow edge is comprised of (2) rubber edges mounted together, which are each 1/2" thick. This provides a total of 1" of edge clearing material for pavement cleaning coverage as well as the additional edge thickness to endure very heavy and frequent use.
UHMW Mounting strap for both the blades edge and the top flap. Our UHMW is double the thickness of our steel strap for maximum binding strength. This material is also corrosion proof.
Our Top Flap kit is included to enhance the blade's production, reduce snow pushing over the top of the blade and direct snow furthest off the end of the snow blade when angled during blade use.
All of the kit hardware is Stainless Steel, to be as corrosion resistant as possible. All hardware is selected for locking the blade edge and top flap on the blade. Yet we also select the hardware to assures blade edge adjustments for wear and flipping the blade edges is easy as the hardware won't rust.
This Extreme Duty Kit has 25% more blade edge material thickness and 100% more mounting strap thickness for maximum durability.
Using the paired rubber blade edges, provides 2 pairs of rubber edges on each plowing pass clearing the pavement. This is more effective at cleaning the pavement than 1 single blade edge.
This kit is designed for use in areas where snow melt material is heavily applied and used and will impact the snow clearing equipment.
This is also designed for heavy and frequent snow blade use. This kit could endure daily use during the winter based upon how its constructed.
Please see our other BigToolRack Snow Blade products for other options and alternatives.
A special note about Stainless Steel Hardware. Stainless Hardware is very strong and can be difficult to remove if galling or cold welding of the hardware occurs from improper use. To get the best results with stainless hardware, the following use tips should be heeded.
Always lubricate the hardware with silicone before installing or removing the hardware.
Avoid using impact tools and "buzzing" the hardware on and off the blade.
Do not over tighten as it doesn't increase clamping strength
Due to the number of product variables, these kits are often produced with ordered. Please allow us 14 business days to produce and ship your purchase. We will advise you of the shipping day and provide tracking numbers for your use. Thank you for your interest in our kits.