Boss Poly Plow UHMW Plow Edge Kit
Edit for Boss Poly Plow UHMW Plow Edge Kit
Standard Duty, Commercial Duty
Free Shipping in the U.S. via U.S.P.S. Priority Mail
Ground Delivery to the lower 48
BOSS makes a great plow but it needs a custom made edge to protect the pavement and not cause any abrasion damage. We offer rubber plow edge kits for this plow, which are listed in the Boss Section.
This listing is for the UHMW Plow Edge. UHMW is Ultra High Molecular Weight poly material, which is the low friction, very low abrasion material which is ideal for being used as a Plow edge.
At SulleyBear Solutions, LLC, we commonly offer two UHMW Plow edges for plows of this size. These two plow edges are
The Residential UHMW Plow Edge- Which is made from 1” thick UHMW which is 5” tall, and 60 inches wide, the width of the plow polu moldboard.
The Commercial UHMW Plow Edge- Made from 1.25” thick UHMW, which is 6” tall, 60 inches wide.
Either UHMW Plow Edge is mounted to the plow moldboard where the steel plow edge usually is mounted. When the UHMW plow wear edge is installed on the Boss Poly Plow, the UHMW is bolted through the plow moldboard using corrosion resistant bolts. Generally, the UHMW edge is secured to the plow using the same size plow hardware which holds the steel plow edge.
Our Plow edge is machined with vertical adjustment slots to give you a wear edge which is double sided and allows for full adjustment in either vertical installation. When the first wear edge wears, you can adjust the wear edge to maintain the perfect amount of rubber below the plow moldboard.
Please note, the UHMW Plow Edge does not use the same hardware which secures the steel plow edge to the Poly Plow as the lengths are different. Also, the Steel plow edge hardware is often “plow bolts” which are a flat headed, tapered seat fastener which is threaded. The steel is suited to plow bolts, the UHMW must use other fasteners.
The UHMW Plow Edge will be secured to the plow using through bolts and either flat plates or larger fender washers to help hold the UHMW. The UHMW also may be secured using steel straps, depending upon other factors.
Do you have another size, style, make or model of plow for which you are looking for a rubber, UHMW wear edge or some other custom made product? We make these weekly, just contact us for more details.
This UHMW Plow edge is not a stocked item and has to be produced when ordered. Please allow 10 to 15 business days for the order to be produced and shipped. Thank you for your interest in our products
Special Needs require and demand Special Solutions.
You really do get what you pay for. We provide premium solutions to our customers needs. We don’t make a “cheap plow edge” because we want it to exceed the customers expectations, not simply meet them. We provide an edge which will clean the pavement very well, be very durable, long lasting, is great looking and easy to install, easy to adjust as used and designed to last a long time with the dual sided plow edge.
If you have a special situation or a unique need, please let us know as we will design and fabricate a custom solution to meet our clients needs. We do it every day. Thank you for your interest in our products and please do not hesitate to contact us with any questions of concerns you may have.
We enjoy the challenge of solving our clients difficult needs and special situations with a premium custom product they are proud to own and which makes completing their tasks even easier……
Special THANK YOU to our great customer and friend Aaron with his Ditch Witch and 60” Boss Plow for all of his help and wonderful photos showcasing our product on his plow. We make edges for plows on anything which will push show.
Edit for Boss Poly Plow UHMW Plow Edge Kit
Standard Duty, Commercial Duty
Free Shipping in the U.S. via U.S.P.S. Priority Mail
Ground Delivery to the lower 48
BOSS makes a great plow but it needs a custom made edge to protect the pavement and not cause any abrasion damage. We offer rubber plow edge kits for this plow, which are listed in the Boss Section.
This listing is for the UHMW Plow Edge. UHMW is Ultra High Molecular Weight poly material, which is the low friction, very low abrasion material which is ideal for being used as a Plow edge.
At SulleyBear Solutions, LLC, we commonly offer two UHMW Plow edges for plows of this size. These two plow edges are
The Residential UHMW Plow Edge- Which is made from 1” thick UHMW which is 5” tall, and 60 inches wide, the width of the plow polu moldboard.
The Commercial UHMW Plow Edge- Made from 1.25” thick UHMW, which is 6” tall, 60 inches wide.
Either UHMW Plow Edge is mounted to the plow moldboard where the steel plow edge usually is mounted. When the UHMW plow wear edge is installed on the Boss Poly Plow, the UHMW is bolted through the plow moldboard using corrosion resistant bolts. Generally, the UHMW edge is secured to the plow using the same size plow hardware which holds the steel plow edge.
Our Plow edge is machined with vertical adjustment slots to give you a wear edge which is double sided and allows for full adjustment in either vertical installation. When the first wear edge wears, you can adjust the wear edge to maintain the perfect amount of rubber below the plow moldboard.
Please note, the UHMW Plow Edge does not use the same hardware which secures the steel plow edge to the Poly Plow as the lengths are different. Also, the Steel plow edge hardware is often “plow bolts” which are a flat headed, tapered seat fastener which is threaded. The steel is suited to plow bolts, the UHMW must use other fasteners.
The UHMW Plow Edge will be secured to the plow using through bolts and either flat plates or larger fender washers to help hold the UHMW. The UHMW also may be secured using steel straps, depending upon other factors.
Do you have another size, style, make or model of plow for which you are looking for a rubber, UHMW wear edge or some other custom made product? We make these weekly, just contact us for more details.
This UHMW Plow edge is not a stocked item and has to be produced when ordered. Please allow 10 to 15 business days for the order to be produced and shipped. Thank you for your interest in our products
Special Needs require and demand Special Solutions.
You really do get what you pay for. We provide premium solutions to our customers needs. We don’t make a “cheap plow edge” because we want it to exceed the customers expectations, not simply meet them. We provide an edge which will clean the pavement very well, be very durable, long lasting, is great looking and easy to install, easy to adjust as used and designed to last a long time with the dual sided plow edge.
If you have a special situation or a unique need, please let us know as we will design and fabricate a custom solution to meet our clients needs. We do it every day. Thank you for your interest in our products and please do not hesitate to contact us with any questions of concerns you may have.
We enjoy the challenge of solving our clients difficult needs and special situations with a premium custom product they are proud to own and which makes completing their tasks even easier……
Special THANK YOU to our great customer and friend Aaron with his Ditch Witch and 60” Boss Plow for all of his help and wonderful photos showcasing our product on his plow. We make edges for plows on anything which will push show.
Edit for Boss Poly Plow UHMW Plow Edge Kit
Standard Duty, Commercial Duty
Free Shipping in the U.S. via U.S.P.S. Priority Mail
Ground Delivery to the lower 48
BOSS makes a great plow but it needs a custom made edge to protect the pavement and not cause any abrasion damage. We offer rubber plow edge kits for this plow, which are listed in the Boss Section.
This listing is for the UHMW Plow Edge. UHMW is Ultra High Molecular Weight poly material, which is the low friction, very low abrasion material which is ideal for being used as a Plow edge.
At SulleyBear Solutions, LLC, we commonly offer two UHMW Plow edges for plows of this size. These two plow edges are
The Residential UHMW Plow Edge- Which is made from 1” thick UHMW which is 5” tall, and 60 inches wide, the width of the plow polu moldboard.
The Commercial UHMW Plow Edge- Made from 1.25” thick UHMW, which is 6” tall, 60 inches wide.
Either UHMW Plow Edge is mounted to the plow moldboard where the steel plow edge usually is mounted. When the UHMW plow wear edge is installed on the Boss Poly Plow, the UHMW is bolted through the plow moldboard using corrosion resistant bolts. Generally, the UHMW edge is secured to the plow using the same size plow hardware which holds the steel plow edge.
Our Plow edge is machined with vertical adjustment slots to give you a wear edge which is double sided and allows for full adjustment in either vertical installation. When the first wear edge wears, you can adjust the wear edge to maintain the perfect amount of rubber below the plow moldboard.
Please note, the UHMW Plow Edge does not use the same hardware which secures the steel plow edge to the Poly Plow as the lengths are different. Also, the Steel plow edge hardware is often “plow bolts” which are a flat headed, tapered seat fastener which is threaded. The steel is suited to plow bolts, the UHMW must use other fasteners.
The UHMW Plow Edge will be secured to the plow using through bolts and either flat plates or larger fender washers to help hold the UHMW. The UHMW also may be secured using steel straps, depending upon other factors.
Do you have another size, style, make or model of plow for which you are looking for a rubber, UHMW wear edge or some other custom made product? We make these weekly, just contact us for more details.
This UHMW Plow edge is not a stocked item and has to be produced when ordered. Please allow 10 to 15 business days for the order to be produced and shipped. Thank you for your interest in our products
Special Needs require and demand Special Solutions.
You really do get what you pay for. We provide premium solutions to our customers needs. We don’t make a “cheap plow edge” because we want it to exceed the customers expectations, not simply meet them. We provide an edge which will clean the pavement very well, be very durable, long lasting, is great looking and easy to install, easy to adjust as used and designed to last a long time with the dual sided plow edge.
If you have a special situation or a unique need, please let us know as we will design and fabricate a custom solution to meet our clients needs. We do it every day. Thank you for your interest in our products and please do not hesitate to contact us with any questions of concerns you may have.
We enjoy the challenge of solving our clients difficult needs and special situations with a premium custom product they are proud to own and which makes completing their tasks even easier……
Special THANK YOU to our great customer and friend Aaron with his Ditch Witch and 60” Boss Plow for all of his help and wonderful photos showcasing our product on his plow. We make edges for plows on anything which will push show.
Custom made edges and kits usually require 8 to 10 business days to produce and send to our customers. We produce all customers products in the order they are received. Some orders may require us to acquire special materials for their unique needs. We will keep you informed on our shipping status and we look forward to working with our customers to meet all of their needs. Thank you for your interest in our products.