CTA Quick Hitch, FEL Plows Top Flap Kit
This kit includes FREE Ground Delivery Via
USPS or UPS to the Lower 48 States
A Plow top flap kit profoundly changes the way these CTA Plows perform. They are already the ideal front snow plow for these SCUT and CUT tractors as they are sized right for these machines. Now, adding a plow top flap is like the Cherry on top of the Sundae along with some crushed almonds, or maybe walnuts. Even peanuts if the mood is right.
The top flap changes the plows snow clearing results by improving on these snow clearing challenges.
The top flap prevents the snow from pushing over the top of the blade in deep snow or when stacking snow. This reduces clear up time.
The snow keeps the deep snow on windy days off your face or windshield. In either case, it improves your visibility.
The top flap also helps to direct the snow off the end of the plow blade and over the snow bank along the road side. If you don’t have a top flap when pushing snow with the blade at the 30 degree angle, much of the snow will slide off the end of the plow into the snowbank and then drop into the road as the tractor passes by. That’s not ideal for keeping the snowbanks pushed back.
With the top flap, especially our larger top flap, it helps to roll the snow off the end of the blade. The flap encourages the snow across the blade to roll from the leading end of the plow, off the angled back end of the plow. The flap increases the snow volume it will roll as well as directs it off the end of the plow at a elevated arc. Once you see it, you will appreciate it. It can actually direct the snow OVER the road side snowbanks to fall away from the road, instead of in it. Now, that’s the ticket as they used to say……
We produce two top flaps for our plow kits. Essentially, here are the two plow flap options.
Option A is the larger flap which is 8” wide front to back and about 1/4” of an inch thick. The rubber is NOT reinforced, so it looks nicer and doesn’t have the annoying threads in it, which make it look like it always shedding hair. Good news is our top flap are bald, not a hair to be found. And on a top flap, that’s good thing.
Option B is the smaller of the two flaps, but its thicker and stiffer. This top flap is 1/2” thick and 6” front to back on the top edge of the plow. This flap is designed for snow which is wet and heavy, where Option A is best suited for snow which is light and fluffy.
Both flaps work well, just in their own way. Some owners want a shorter top flap, others want a longer. Many don’t care. If you need and or want a top flap, pick the one which best meets your needs.
Our top flaps are held on the plows top flange which is already drilled for mounting. Our top flap’s mounting strap mounts on the plows edge with our stainless hardware. For a cleaner look, we use Stainless Carriage bolts, which are marine grade and won’t rust or corrode.
The top flap mounting strap is made of 1/2” thick UHMW cut precisely to align with the edges of the plows top rail. The UHMW is square cut to securely hold the carriage bolts shanks so the carriage bolt heads are flush on the strap.
Easy to install and looks and works great. The most common reply we hear from new owners is “I can’t believe I waited as long as I did to get the top flap. I should have gotten in long ago.
This custom made plow top flap increases the plow’s productivity by helping to roll the snow forward. This increases the plow operators visibility, and also keeps the snow ahead of the plow, where it should be.
Made from high quality rubber, which offers the best combination of flexibility, function as well as making the plow complete, this plow flap kit is complete with the custom plow flap, plug cut holes for optimal function and easy installation. This top flap is held on the plow with carriage bolts and lock nuts, which are coated to resist corrosion.
To complete the installation and make it strong, attractive and professional, there is a UHMW strap included in this kit, to hold the plow top flap on your CTA Plow.
The steel strap to hold the plow top flap is cut into 3 sections to make installation easier as well as combine the shipping of the strap in the same package as the rubber edge. You will receive the custom cut rubber edge, with plug cut holes, the steel strap to securely hold the edge to plow and the coated carriage bolts to complete the installation.
Installation couldn’t be easier and takes less than 10 minutes. Installation instructions are included in the kit.
Thank you for your interest in our products.
This kit includes FREE Ground Delivery Via
USPS or UPS to the Lower 48 States
A Plow top flap kit profoundly changes the way these CTA Plows perform. They are already the ideal front snow plow for these SCUT and CUT tractors as they are sized right for these machines. Now, adding a plow top flap is like the Cherry on top of the Sundae along with some crushed almonds, or maybe walnuts. Even peanuts if the mood is right.
The top flap changes the plows snow clearing results by improving on these snow clearing challenges.
The top flap prevents the snow from pushing over the top of the blade in deep snow or when stacking snow. This reduces clear up time.
The snow keeps the deep snow on windy days off your face or windshield. In either case, it improves your visibility.
The top flap also helps to direct the snow off the end of the plow blade and over the snow bank along the road side. If you don’t have a top flap when pushing snow with the blade at the 30 degree angle, much of the snow will slide off the end of the plow into the snowbank and then drop into the road as the tractor passes by. That’s not ideal for keeping the snowbanks pushed back.
With the top flap, especially our larger top flap, it helps to roll the snow off the end of the blade. The flap encourages the snow across the blade to roll from the leading end of the plow, off the angled back end of the plow. The flap increases the snow volume it will roll as well as directs it off the end of the plow at a elevated arc. Once you see it, you will appreciate it. It can actually direct the snow OVER the road side snowbanks to fall away from the road, instead of in it. Now, that’s the ticket as they used to say……
We produce two top flaps for our plow kits. Essentially, here are the two plow flap options.
Option A is the larger flap which is 8” wide front to back and about 1/4” of an inch thick. The rubber is NOT reinforced, so it looks nicer and doesn’t have the annoying threads in it, which make it look like it always shedding hair. Good news is our top flap are bald, not a hair to be found. And on a top flap, that’s good thing.
Option B is the smaller of the two flaps, but its thicker and stiffer. This top flap is 1/2” thick and 6” front to back on the top edge of the plow. This flap is designed for snow which is wet and heavy, where Option A is best suited for snow which is light and fluffy.
Both flaps work well, just in their own way. Some owners want a shorter top flap, others want a longer. Many don’t care. If you need and or want a top flap, pick the one which best meets your needs.
Our top flaps are held on the plows top flange which is already drilled for mounting. Our top flap’s mounting strap mounts on the plows edge with our stainless hardware. For a cleaner look, we use Stainless Carriage bolts, which are marine grade and won’t rust or corrode.
The top flap mounting strap is made of 1/2” thick UHMW cut precisely to align with the edges of the plows top rail. The UHMW is square cut to securely hold the carriage bolts shanks so the carriage bolt heads are flush on the strap.
Easy to install and looks and works great. The most common reply we hear from new owners is “I can’t believe I waited as long as I did to get the top flap. I should have gotten in long ago.
This custom made plow top flap increases the plow’s productivity by helping to roll the snow forward. This increases the plow operators visibility, and also keeps the snow ahead of the plow, where it should be.
Made from high quality rubber, which offers the best combination of flexibility, function as well as making the plow complete, this plow flap kit is complete with the custom plow flap, plug cut holes for optimal function and easy installation. This top flap is held on the plow with carriage bolts and lock nuts, which are coated to resist corrosion.
To complete the installation and make it strong, attractive and professional, there is a UHMW strap included in this kit, to hold the plow top flap on your CTA Plow.
The steel strap to hold the plow top flap is cut into 3 sections to make installation easier as well as combine the shipping of the strap in the same package as the rubber edge. You will receive the custom cut rubber edge, with plug cut holes, the steel strap to securely hold the edge to plow and the coated carriage bolts to complete the installation.
Installation couldn’t be easier and takes less than 10 minutes. Installation instructions are included in the kit.
Thank you for your interest in our products.
This kit includes FREE Ground Delivery Via
USPS or UPS to the Lower 48 States
A Plow top flap kit profoundly changes the way these CTA Plows perform. They are already the ideal front snow plow for these SCUT and CUT tractors as they are sized right for these machines. Now, adding a plow top flap is like the Cherry on top of the Sundae along with some crushed almonds, or maybe walnuts. Even peanuts if the mood is right.
The top flap changes the plows snow clearing results by improving on these snow clearing challenges.
The top flap prevents the snow from pushing over the top of the blade in deep snow or when stacking snow. This reduces clear up time.
The snow keeps the deep snow on windy days off your face or windshield. In either case, it improves your visibility.
The top flap also helps to direct the snow off the end of the plow blade and over the snow bank along the road side. If you don’t have a top flap when pushing snow with the blade at the 30 degree angle, much of the snow will slide off the end of the plow into the snowbank and then drop into the road as the tractor passes by. That’s not ideal for keeping the snowbanks pushed back.
With the top flap, especially our larger top flap, it helps to roll the snow off the end of the blade. The flap encourages the snow across the blade to roll from the leading end of the plow, off the angled back end of the plow. The flap increases the snow volume it will roll as well as directs it off the end of the plow at a elevated arc. Once you see it, you will appreciate it. It can actually direct the snow OVER the road side snowbanks to fall away from the road, instead of in it. Now, that’s the ticket as they used to say……
We produce two top flaps for our plow kits. Essentially, here are the two plow flap options.
Option A is the larger flap which is 8” wide front to back and about 1/4” of an inch thick. The rubber is NOT reinforced, so it looks nicer and doesn’t have the annoying threads in it, which make it look like it always shedding hair. Good news is our top flap are bald, not a hair to be found. And on a top flap, that’s good thing.
Option B is the smaller of the two flaps, but its thicker and stiffer. This top flap is 1/2” thick and 6” front to back on the top edge of the plow. This flap is designed for snow which is wet and heavy, where Option A is best suited for snow which is light and fluffy.
Both flaps work well, just in their own way. Some owners want a shorter top flap, others want a longer. Many don’t care. If you need and or want a top flap, pick the one which best meets your needs.
Our top flaps are held on the plows top flange which is already drilled for mounting. Our top flap’s mounting strap mounts on the plows edge with our stainless hardware. For a cleaner look, we use Stainless Carriage bolts, which are marine grade and won’t rust or corrode.
The top flap mounting strap is made of 1/2” thick UHMW cut precisely to align with the edges of the plows top rail. The UHMW is square cut to securely hold the carriage bolts shanks so the carriage bolt heads are flush on the strap.
Easy to install and looks and works great. The most common reply we hear from new owners is “I can’t believe I waited as long as I did to get the top flap. I should have gotten in long ago.
This custom made plow top flap increases the plow’s productivity by helping to roll the snow forward. This increases the plow operators visibility, and also keeps the snow ahead of the plow, where it should be.
Made from high quality rubber, which offers the best combination of flexibility, function as well as making the plow complete, this plow flap kit is complete with the custom plow flap, plug cut holes for optimal function and easy installation. This top flap is held on the plow with carriage bolts and lock nuts, which are coated to resist corrosion.
To complete the installation and make it strong, attractive and professional, there is a UHMW strap included in this kit, to hold the plow top flap on your CTA Plow.
The steel strap to hold the plow top flap is cut into 3 sections to make installation easier as well as combine the shipping of the strap in the same package as the rubber edge. You will receive the custom cut rubber edge, with plug cut holes, the steel strap to securely hold the edge to plow and the coated carriage bolts to complete the installation.
Installation couldn’t be easier and takes less than 10 minutes. Installation instructions are included in the kit.
Thank you for your interest in our products.
Kit is complete with the rubber edge with holes professionally cut for easy installation , the metal mounting strap, coated carriage bolts with lock nuts to make installation easy. Please note, the lower plow edge, strap for the lower edge and lower edge hardware shown in this photo are not included in this plow top flap kit.
For those seeking an entire CTA Plow upgrade kit, please see the CTA Plow Rubber Edge, Strap, Top Flap, Strap and hardware complete kit for the upgrading of the entire CTA Plow. Thank you.