Frontier Front Plow UHMW Plow Edge/Kit 72-96"
Free Ground Shipping within the Lower 48 states
Have you had enough of the damage to the pavement surfaces from the steel plow edge grinding on the pavement? Tired of rust on the garage floor under the plow, rust shards in the pavement and also scraped off pavement sealers and surfaces ending up in the grass?
Now might be the the time to replace that steel edge with our UHMW Plow Edge. Our edges are extremely strong, have very minimal surface friction, push much easier on the pavement, are quiet and smooth and eliminate the banging of the steel plow edge.
We offer two UHMW plow edges for the Frontier plows to choose from, based upon which best suits our customers needs. Either edge is
already cut to length,
the mounting holes are professionally machine cut into the UHMW using laser guided computer controlled cutting machines, to make mounting the edge easy and able to be completed in a matter of minutes.
The Edge Includes our standard mounting hardware which are bolts, flat washers and lock nuts.
Mounts with standard hand tools in under 15 minutes.
Both of our UHMW edges for this plow are Dual sided and can be flipped over for another entire wear edge on the other side of our edge when the first wear edge has been worn down.
This is like having two wear edges in either of our UHMW Plow Edges.
Our Standard Duty UHMW Edge, is made from black UHMW, 5” tall, 1” thick and cut the full width of the plow moldboard. Ideal for residential use, Our Standard Duty Edge includes our standard bolts, flat washers and Locks nuts to make the installation of this edge easily completed in just a matter of minutes.
Our Commercial Duty UHMW Edge is larger and thicker UHMW, designed to provide longer wear life. It is cut from black UHMW that is 6” tall and 1.25” thick. The additional 20% in UHMW Edge height and 25% additional thickness of the commercial duty UHMW edge will extended the already long wear life before needing to be replaced.
Whether you choose the Standard Duty Edge or the Commercial Duty Edge, when you purchase the Edge ONLY, it includes our standard quality cap screw bolts, flat washers and lock nuts.
Our EDGE KIT, in available with either the Standard Duty Edge or the Commercial Duty Edge, Our EDGE KIT includes our Marine Grade Stainless Hardware, which is the most corrosion resistant hardware available for installing the UHMW.
The Stainless hardware is very tough, highly resistant to rust and corrosion and will allow easy edge adjustments and the flipping over of the plow edge when the first edge is worn down.
If you want the best hardware with your UHMW edge, whether you purchase the Standard duty or the Commercial duty plow edge, make sure to select the EDGE KIT for the stainless bolts, stainless flat washers and stainless Nylock Nuts to install your new UHMW plow Edge.
How do you select the UHMW Edge for your Plow?
Determine whether you would like the Standard Duty or the Commercial Duty edge and select the button for the edge you choose.
Select your plow Model and Size by choosing the button which described your plow model and size.
Choose either the Edge or the Edge Kit. The Edge ships with our basic hardware where the Edge Kit includes the upgraded Stainless Steel hardware kit, of bolts, flat washers, lock nuts, etc. The stainless hardware is marine grade and the most corrosion resistant hardware available on the marketplace.
Important UHMW Edge Mounting Details
The UHMW product is a very strong and sturdy plow edge material. It mounts to the plow moldboard directly using cap screw bolts, with large flat washers under the bolt head to help hold the UHMW edge securely. The installation of the UHMW edge will resemble the steel edge with the plow edge being held directly on the plow with bolts.
There is not a “mounting strap” to secure the UHMW material as there is with the rubber edge, as the UHMW is very sturdy, strong and can be installed and used with cap screw bolts. We do use large “fender washers” under the bolt heads to provide maximum edge clamping strength.
As a result, your UHMW edge will be shipped to you with the hardware included that you select. If you choose the “Edge”, the UHMW will be shipped with our standard hardware. If you choose the “Edge Kit”, the hardware is upgraded to our Marine Grade Stainless hardware kit, for the most corrosion resistant hardware available.
Here are some common questions we receive about these UHMW Plow Edges.
How long should you expect this UHMW Plow edge to last? If you are plowing your own driveway and its less than 500 feet in length, I would expect you to have voted in likely 2 and possibly 3 Presidential elections before needing to replace this plow edge. Even with light commercial use, this edge should provide 3 to 5 years of predictable wear results.*
What pavement or surfaces are ideal for using a UHMW Plow Edge?
The UHMW Plow Edge is Ideal for
mature asphalt and concrete
combination pavements of hard surfaces such as asphalt and concrete
pavement which is relatively smooth
However, If you have to clear snow from these surfaces, you would likely be better served with our Rubber Plow Edge Kits
textured, imprinted or colored concrete surfaces
brick pavers of any design with high numbers of pavement joints
surfaces which are fragile or easily damaged with snow scraping or blowing implements
Asphalt surfaces which are not yet “grayed in” or fully cured. These are usually those which are less than 12 months old.
Pushing snow onto a lawn, grass or landscaped areas.
Gravel or loose aggregate
Pavement which is in poor condition and needs to be refinished or replaced
*Be careful with the down pressure applied to this edge and you will get a very long and productive use of this edge. Excessive down pressure applied to the wear edge doesn’t improve the products function and just wears the product more aggressively.
Shipped in one length, ready to install. When packaged for shipment, This is an oversize item with “dimensional shipping charges” which are factored into the items total price.
Free Ground Shipping within the Lower 48 states
Have you had enough of the damage to the pavement surfaces from the steel plow edge grinding on the pavement? Tired of rust on the garage floor under the plow, rust shards in the pavement and also scraped off pavement sealers and surfaces ending up in the grass?
Now might be the the time to replace that steel edge with our UHMW Plow Edge. Our edges are extremely strong, have very minimal surface friction, push much easier on the pavement, are quiet and smooth and eliminate the banging of the steel plow edge.
We offer two UHMW plow edges for the Frontier plows to choose from, based upon which best suits our customers needs. Either edge is
already cut to length,
the mounting holes are professionally machine cut into the UHMW using laser guided computer controlled cutting machines, to make mounting the edge easy and able to be completed in a matter of minutes.
The Edge Includes our standard mounting hardware which are bolts, flat washers and lock nuts.
Mounts with standard hand tools in under 15 minutes.
Both of our UHMW edges for this plow are Dual sided and can be flipped over for another entire wear edge on the other side of our edge when the first wear edge has been worn down.
This is like having two wear edges in either of our UHMW Plow Edges.
Our Standard Duty UHMW Edge, is made from black UHMW, 5” tall, 1” thick and cut the full width of the plow moldboard. Ideal for residential use, Our Standard Duty Edge includes our standard bolts, flat washers and Locks nuts to make the installation of this edge easily completed in just a matter of minutes.
Our Commercial Duty UHMW Edge is larger and thicker UHMW, designed to provide longer wear life. It is cut from black UHMW that is 6” tall and 1.25” thick. The additional 20% in UHMW Edge height and 25% additional thickness of the commercial duty UHMW edge will extended the already long wear life before needing to be replaced.
Whether you choose the Standard Duty Edge or the Commercial Duty Edge, when you purchase the Edge ONLY, it includes our standard quality cap screw bolts, flat washers and lock nuts.
Our EDGE KIT, in available with either the Standard Duty Edge or the Commercial Duty Edge, Our EDGE KIT includes our Marine Grade Stainless Hardware, which is the most corrosion resistant hardware available for installing the UHMW.
The Stainless hardware is very tough, highly resistant to rust and corrosion and will allow easy edge adjustments and the flipping over of the plow edge when the first edge is worn down.
If you want the best hardware with your UHMW edge, whether you purchase the Standard duty or the Commercial duty plow edge, make sure to select the EDGE KIT for the stainless bolts, stainless flat washers and stainless Nylock Nuts to install your new UHMW plow Edge.
How do you select the UHMW Edge for your Plow?
Determine whether you would like the Standard Duty or the Commercial Duty edge and select the button for the edge you choose.
Select your plow Model and Size by choosing the button which described your plow model and size.
Choose either the Edge or the Edge Kit. The Edge ships with our basic hardware where the Edge Kit includes the upgraded Stainless Steel hardware kit, of bolts, flat washers, lock nuts, etc. The stainless hardware is marine grade and the most corrosion resistant hardware available on the marketplace.
Important UHMW Edge Mounting Details
The UHMW product is a very strong and sturdy plow edge material. It mounts to the plow moldboard directly using cap screw bolts, with large flat washers under the bolt head to help hold the UHMW edge securely. The installation of the UHMW edge will resemble the steel edge with the plow edge being held directly on the plow with bolts.
There is not a “mounting strap” to secure the UHMW material as there is with the rubber edge, as the UHMW is very sturdy, strong and can be installed and used with cap screw bolts. We do use large “fender washers” under the bolt heads to provide maximum edge clamping strength.
As a result, your UHMW edge will be shipped to you with the hardware included that you select. If you choose the “Edge”, the UHMW will be shipped with our standard hardware. If you choose the “Edge Kit”, the hardware is upgraded to our Marine Grade Stainless hardware kit, for the most corrosion resistant hardware available.
Here are some common questions we receive about these UHMW Plow Edges.
How long should you expect this UHMW Plow edge to last? If you are plowing your own driveway and its less than 500 feet in length, I would expect you to have voted in likely 2 and possibly 3 Presidential elections before needing to replace this plow edge. Even with light commercial use, this edge should provide 3 to 5 years of predictable wear results.*
What pavement or surfaces are ideal for using a UHMW Plow Edge?
The UHMW Plow Edge is Ideal for
mature asphalt and concrete
combination pavements of hard surfaces such as asphalt and concrete
pavement which is relatively smooth
However, If you have to clear snow from these surfaces, you would likely be better served with our Rubber Plow Edge Kits
textured, imprinted or colored concrete surfaces
brick pavers of any design with high numbers of pavement joints
surfaces which are fragile or easily damaged with snow scraping or blowing implements
Asphalt surfaces which are not yet “grayed in” or fully cured. These are usually those which are less than 12 months old.
Pushing snow onto a lawn, grass or landscaped areas.
Gravel or loose aggregate
Pavement which is in poor condition and needs to be refinished or replaced
*Be careful with the down pressure applied to this edge and you will get a very long and productive use of this edge. Excessive down pressure applied to the wear edge doesn’t improve the products function and just wears the product more aggressively.
Shipped in one length, ready to install. When packaged for shipment, This is an oversize item with “dimensional shipping charges” which are factored into the items total price.
Free Ground Shipping within the Lower 48 states
Have you had enough of the damage to the pavement surfaces from the steel plow edge grinding on the pavement? Tired of rust on the garage floor under the plow, rust shards in the pavement and also scraped off pavement sealers and surfaces ending up in the grass?
Now might be the the time to replace that steel edge with our UHMW Plow Edge. Our edges are extremely strong, have very minimal surface friction, push much easier on the pavement, are quiet and smooth and eliminate the banging of the steel plow edge.
We offer two UHMW plow edges for the Frontier plows to choose from, based upon which best suits our customers needs. Either edge is
already cut to length,
the mounting holes are professionally machine cut into the UHMW using laser guided computer controlled cutting machines, to make mounting the edge easy and able to be completed in a matter of minutes.
The Edge Includes our standard mounting hardware which are bolts, flat washers and lock nuts.
Mounts with standard hand tools in under 15 minutes.
Both of our UHMW edges for this plow are Dual sided and can be flipped over for another entire wear edge on the other side of our edge when the first wear edge has been worn down.
This is like having two wear edges in either of our UHMW Plow Edges.
Our Standard Duty UHMW Edge, is made from black UHMW, 5” tall, 1” thick and cut the full width of the plow moldboard. Ideal for residential use, Our Standard Duty Edge includes our standard bolts, flat washers and Locks nuts to make the installation of this edge easily completed in just a matter of minutes.
Our Commercial Duty UHMW Edge is larger and thicker UHMW, designed to provide longer wear life. It is cut from black UHMW that is 6” tall and 1.25” thick. The additional 20% in UHMW Edge height and 25% additional thickness of the commercial duty UHMW edge will extended the already long wear life before needing to be replaced.
Whether you choose the Standard Duty Edge or the Commercial Duty Edge, when you purchase the Edge ONLY, it includes our standard quality cap screw bolts, flat washers and lock nuts.
Our EDGE KIT, in available with either the Standard Duty Edge or the Commercial Duty Edge, Our EDGE KIT includes our Marine Grade Stainless Hardware, which is the most corrosion resistant hardware available for installing the UHMW.
The Stainless hardware is very tough, highly resistant to rust and corrosion and will allow easy edge adjustments and the flipping over of the plow edge when the first edge is worn down.
If you want the best hardware with your UHMW edge, whether you purchase the Standard duty or the Commercial duty plow edge, make sure to select the EDGE KIT for the stainless bolts, stainless flat washers and stainless Nylock Nuts to install your new UHMW plow Edge.
How do you select the UHMW Edge for your Plow?
Determine whether you would like the Standard Duty or the Commercial Duty edge and select the button for the edge you choose.
Select your plow Model and Size by choosing the button which described your plow model and size.
Choose either the Edge or the Edge Kit. The Edge ships with our basic hardware where the Edge Kit includes the upgraded Stainless Steel hardware kit, of bolts, flat washers, lock nuts, etc. The stainless hardware is marine grade and the most corrosion resistant hardware available on the marketplace.
Important UHMW Edge Mounting Details
The UHMW product is a very strong and sturdy plow edge material. It mounts to the plow moldboard directly using cap screw bolts, with large flat washers under the bolt head to help hold the UHMW edge securely. The installation of the UHMW edge will resemble the steel edge with the plow edge being held directly on the plow with bolts.
There is not a “mounting strap” to secure the UHMW material as there is with the rubber edge, as the UHMW is very sturdy, strong and can be installed and used with cap screw bolts. We do use large “fender washers” under the bolt heads to provide maximum edge clamping strength.
As a result, your UHMW edge will be shipped to you with the hardware included that you select. If you choose the “Edge”, the UHMW will be shipped with our standard hardware. If you choose the “Edge Kit”, the hardware is upgraded to our Marine Grade Stainless hardware kit, for the most corrosion resistant hardware available.
Here are some common questions we receive about these UHMW Plow Edges.
How long should you expect this UHMW Plow edge to last? If you are plowing your own driveway and its less than 500 feet in length, I would expect you to have voted in likely 2 and possibly 3 Presidential elections before needing to replace this plow edge. Even with light commercial use, this edge should provide 3 to 5 years of predictable wear results.*
What pavement or surfaces are ideal for using a UHMW Plow Edge?
The UHMW Plow Edge is Ideal for
mature asphalt and concrete
combination pavements of hard surfaces such as asphalt and concrete
pavement which is relatively smooth
However, If you have to clear snow from these surfaces, you would likely be better served with our Rubber Plow Edge Kits
textured, imprinted or colored concrete surfaces
brick pavers of any design with high numbers of pavement joints
surfaces which are fragile or easily damaged with snow scraping or blowing implements
Asphalt surfaces which are not yet “grayed in” or fully cured. These are usually those which are less than 12 months old.
Pushing snow onto a lawn, grass or landscaped areas.
Gravel or loose aggregate
Pavement which is in poor condition and needs to be refinished or replaced
*Be careful with the down pressure applied to this edge and you will get a very long and productive use of this edge. Excessive down pressure applied to the wear edge doesn’t improve the products function and just wears the product more aggressively.
Shipped in one length, ready to install. When packaged for shipment, This is an oversize item with “dimensional shipping charges” which are factored into the items total price.
Due to the popularity of the Frontier AF10F plow, we hope to maintain an inventory of these edges ready to ship. However, seasonal demand can cause short time periods where we are between producing this edge and we don’t have this edge in stock and ready to ship. When you purchase this edge, we will send you a message and provide the estimated shipping date of this product. When your order does ship, we will notify you of the shipment date and provide tracking numbers. Thank you for your interest in our products.