Frontier AF11E Rubber Plow Edge Kit, 72" wide FEL Plow, replaces Deere Part number 5FPLAF6486
Includes FREE SHIPPING via Ground Delivery to Lower 48 in U.S.A.
This is the complete kit for installation, which includes the custom made, high quality, precision cut rubber plow edge and the steel mounting strap and hardware to change your Frontier AF11E FEL Mounted Plow from a steel edge, pavement damaging beast, to a pavement protecting, snow clearing implement.
This kit is used in place of Deere part number 5FPLAF6486. Deere retails this kit for $856 and some dealers sell it for $761. Our price is $559 and includes free ground shipping of the kit. Save over $200 and get a superior kit and free shipping.
Reasons why our kit is superior to the Deere kit include;
Our kit is made with a rubber edge which can be flipped so you are getting two rubber plow edges in the one double edged rubber edge.
We use heavier metal for our plow mounting strap for better clamping strength, Plus our metal strap is wider than the OEM strip.
Our hardware is specially coated for corrosion resistance to provide trouble free life. When you need to remove the hardware and flip the rubber edge for its next use, the bolts won’t be rusted and need to be replaced.
The rubber is made with vertical adjustment slots, to allow the edge to be adjusted with use. Our strap also has some horizontal adjustment in the square mounting slots in the metal strap.
For those who need an Extreme Duty Plow edge kit, such as for use in heavy snow melt environments, we offer our Extreme Duty Kit, which uses a 1/2” thick, and UHMW (plastic) Mounting Strap to avoid any corrosion. The extreme duty kit also uses all Stainless hardware for mounting, to avoid any corrosion risk.
This kit starts with a top quality, 6” tall, .75” thick rubber plow edge made to fit your 72” wide Frontier Plow. The rubber edge is laser cut for precision fit and for ease of installation. I actually make this edge 1” longer than Deere makes their edge, so this edge properly fits the plow and looks proper when installed.
This edge is the same size as the OEM Deere kit, except our edge is cut with vertical adjustment ability, to get precise wear results. Also, our edge is designed to be flipped over when you have worn out the first side, for another full sized wear edge for your plow. This is the same as getting two rubber wear edges in one kit.
The steel strap is 1/8” steel, precision cut to perfectly fit the plow and securely hold the plow rubber edge on the moldboard. Painted black , custom colors are available at an additional charge. Please see the options below.
Our base kit hardware is superior to the hardware offered on the OEM Plow cutting edge. The OEM hardware is standard grade carriage bolts. Knowing these plows are in tough environments, we offer superior hardware to make servicing your plow less of a challenge.
Our standard hardware is Galvanized Dipped 1/2” -13 carriage bolts, flat washers, lock washers and nuts, all designed to be the highest corrosion resistant hardware available without venturing into the cost of Stainless Steel hardware.
If you are clearing snow in a setting where there is extensive snow melt applied, such as walks and driveways at medical facilities, etc. you should consider the Extreme Duty Kit for superior results. The amount of corrosion which happens to hardware when used in a snow melt environment, is extreme.
Our kit is priced with a significant savings off the price of the OEM Rubber edge kit. Top quality materials, precision machined to fit your Frontier plow and hundreds of dollars less than the OEM price. If you are serious about a rubber edge for your Frontier Plow, our kits are your best value and offer upgrades not available from Deere.
Includes FREE SHIPPING via Ground Delivery to Lower 48 in U.S.A.
This is the complete kit for installation, which includes the custom made, high quality, precision cut rubber plow edge and the steel mounting strap and hardware to change your Frontier AF11E FEL Mounted Plow from a steel edge, pavement damaging beast, to a pavement protecting, snow clearing implement.
This kit is used in place of Deere part number 5FPLAF6486. Deere retails this kit for $856 and some dealers sell it for $761. Our price is $559 and includes free ground shipping of the kit. Save over $200 and get a superior kit and free shipping.
Reasons why our kit is superior to the Deere kit include;
Our kit is made with a rubber edge which can be flipped so you are getting two rubber plow edges in the one double edged rubber edge.
We use heavier metal for our plow mounting strap for better clamping strength, Plus our metal strap is wider than the OEM strip.
Our hardware is specially coated for corrosion resistance to provide trouble free life. When you need to remove the hardware and flip the rubber edge for its next use, the bolts won’t be rusted and need to be replaced.
The rubber is made with vertical adjustment slots, to allow the edge to be adjusted with use. Our strap also has some horizontal adjustment in the square mounting slots in the metal strap.
For those who need an Extreme Duty Plow edge kit, such as for use in heavy snow melt environments, we offer our Extreme Duty Kit, which uses a 1/2” thick, and UHMW (plastic) Mounting Strap to avoid any corrosion. The extreme duty kit also uses all Stainless hardware for mounting, to avoid any corrosion risk.
This kit starts with a top quality, 6” tall, .75” thick rubber plow edge made to fit your 72” wide Frontier Plow. The rubber edge is laser cut for precision fit and for ease of installation. I actually make this edge 1” longer than Deere makes their edge, so this edge properly fits the plow and looks proper when installed.
This edge is the same size as the OEM Deere kit, except our edge is cut with vertical adjustment ability, to get precise wear results. Also, our edge is designed to be flipped over when you have worn out the first side, for another full sized wear edge for your plow. This is the same as getting two rubber wear edges in one kit.
The steel strap is 1/8” steel, precision cut to perfectly fit the plow and securely hold the plow rubber edge on the moldboard. Painted black , custom colors are available at an additional charge. Please see the options below.
Our base kit hardware is superior to the hardware offered on the OEM Plow cutting edge. The OEM hardware is standard grade carriage bolts. Knowing these plows are in tough environments, we offer superior hardware to make servicing your plow less of a challenge.
Our standard hardware is Galvanized Dipped 1/2” -13 carriage bolts, flat washers, lock washers and nuts, all designed to be the highest corrosion resistant hardware available without venturing into the cost of Stainless Steel hardware.
If you are clearing snow in a setting where there is extensive snow melt applied, such as walks and driveways at medical facilities, etc. you should consider the Extreme Duty Kit for superior results. The amount of corrosion which happens to hardware when used in a snow melt environment, is extreme.
Our kit is priced with a significant savings off the price of the OEM Rubber edge kit. Top quality materials, precision machined to fit your Frontier plow and hundreds of dollars less than the OEM price. If you are serious about a rubber edge for your Frontier Plow, our kits are your best value and offer upgrades not available from Deere.
Includes FREE SHIPPING via Ground Delivery to Lower 48 in U.S.A.
This is the complete kit for installation, which includes the custom made, high quality, precision cut rubber plow edge and the steel mounting strap and hardware to change your Frontier AF11E FEL Mounted Plow from a steel edge, pavement damaging beast, to a pavement protecting, snow clearing implement.
This kit is used in place of Deere part number 5FPLAF6486. Deere retails this kit for $856 and some dealers sell it for $761. Our price is $559 and includes free ground shipping of the kit. Save over $200 and get a superior kit and free shipping.
Reasons why our kit is superior to the Deere kit include;
Our kit is made with a rubber edge which can be flipped so you are getting two rubber plow edges in the one double edged rubber edge.
We use heavier metal for our plow mounting strap for better clamping strength, Plus our metal strap is wider than the OEM strip.
Our hardware is specially coated for corrosion resistance to provide trouble free life. When you need to remove the hardware and flip the rubber edge for its next use, the bolts won’t be rusted and need to be replaced.
The rubber is made with vertical adjustment slots, to allow the edge to be adjusted with use. Our strap also has some horizontal adjustment in the square mounting slots in the metal strap.
For those who need an Extreme Duty Plow edge kit, such as for use in heavy snow melt environments, we offer our Extreme Duty Kit, which uses a 1/2” thick, and UHMW (plastic) Mounting Strap to avoid any corrosion. The extreme duty kit also uses all Stainless hardware for mounting, to avoid any corrosion risk.
This kit starts with a top quality, 6” tall, .75” thick rubber plow edge made to fit your 72” wide Frontier Plow. The rubber edge is laser cut for precision fit and for ease of installation. I actually make this edge 1” longer than Deere makes their edge, so this edge properly fits the plow and looks proper when installed.
This edge is the same size as the OEM Deere kit, except our edge is cut with vertical adjustment ability, to get precise wear results. Also, our edge is designed to be flipped over when you have worn out the first side, for another full sized wear edge for your plow. This is the same as getting two rubber wear edges in one kit.
The steel strap is 1/8” steel, precision cut to perfectly fit the plow and securely hold the plow rubber edge on the moldboard. Painted black , custom colors are available at an additional charge. Please see the options below.
Our base kit hardware is superior to the hardware offered on the OEM Plow cutting edge. The OEM hardware is standard grade carriage bolts. Knowing these plows are in tough environments, we offer superior hardware to make servicing your plow less of a challenge.
Our standard hardware is Galvanized Dipped 1/2” -13 carriage bolts, flat washers, lock washers and nuts, all designed to be the highest corrosion resistant hardware available without venturing into the cost of Stainless Steel hardware.
If you are clearing snow in a setting where there is extensive snow melt applied, such as walks and driveways at medical facilities, etc. you should consider the Extreme Duty Kit for superior results. The amount of corrosion which happens to hardware when used in a snow melt environment, is extreme.
Our kit is priced with a significant savings off the price of the OEM Rubber edge kit. Top quality materials, precision machined to fit your Frontier plow and hundreds of dollars less than the OEM price. If you are serious about a rubber edge for your Frontier Plow, our kits are your best value and offer upgrades not available from Deere.