54" UHMW Wear Edge for John Deere 54" Heavy Duty Snow Thrower Replaces TR116550
Includes Free Ground Shipping
in the Lower 48 States.
This part is for the Heavy Duty 54” John Deere front mounted Snowblower, Replaces Deere Part number TR116550. This wear edge is mounted along the back side of the lower edge of the housing, behind the blower auger, where it rides on the pavement.
Specifically fits the Heavy Duty Blowers which have the flat shaped wear bars mounted inside the blower housing at an angle.
This edge mounts using the carriage bolts UNDER the blower and the flange nuts holding the edge are inside the housing and visible when you stand looking at the blower from the front. The row of flange nuts is along the blowers leading edge behind the augers.
Reversible, this blower wear bar provides two wear edges to extend its wear life.
Please view our photos for an example of the wear bars location and specific mounting method. The white arrows in our picture highlight the lock nuts which are visible inside the housing, which hold the wear bar.
Our SBS wear bar includes the wear indicator holes on the blower wear bar to make it easier to know when the blower bar should be flipped over and the new wear bar on the other side used.
The 3 holes grouped together on the wear bar as shown on our product in the photo’s is a unique feature to the HEAVY DUTY wear bars on Deere front mounted blowers.
Our SBS wear bar is thicker and wider than the Deere wear bar, to provide longer wear life.
This blower specifically says “Heavy Duty” in a decal on the blower’s housing as shown in the photo.
Another specific identifying feature of this blower is when you look at the inside of the blower housing, you will notice there are a row of lock nuts behind the auger. These secure the blowers wear bar.
This blower is typically mounted to the tractor with a front 3 point hitch, instead of using the front Quick Tach Hitch mount used with the snow plow.
Eliminates the pavement abrasion caused by the steel wear bar on OEM equipment.
Includes all new, corrosion resistant stainless steel hardware to install on your blower.
Shipped complete, in one piece for maximum strength and long wear life.
Our UHMW wear edge is custom made to replace the John Deere Steel wear bar which fits on the bottom of the Heavy Duty Deere 54" snowblower. This part is a crucial wear bar to protect the snow blower housing against the surface wear which occurs as the blower is pushed across the pavement.
If you are looking to protect your pavement against damage from abrasion from the steel on the snow blower case, this wear edge will greatly reduce the snow blower's abrasion and reduce wear on the blower housing case.
This part is made from UHMW material which is highly abrasion resistant and intended to be used in high wear environments. This edge mounts in the same manner as the OEM steel edge, using bolts from the bottom of the blower housing and lock nuts which secure the wear edge the bottom of the blower.
For the ultimate in protecting your pavement against wear and damage from the blower, we recommend our UHMW Wear bar be used on your blower in conjunction with our UHMW Blower Shoes or our Rubber wear shoes which protect the pavement as well.
Make sure you consider our UHMW blower shoes at the same time to provide pavement protection and also best outfit your blower for stability and pavement work,.
We have a listing tiled “UHMW Shoes and Blower Wear Bar, what you should know”. If you order using the combined link, it will save you 10% on the package of shoes and blower.
Thank you for your interest in our products.
Includes Free Ground Shipping
in the Lower 48 States.
This part is for the Heavy Duty 54” John Deere front mounted Snowblower, Replaces Deere Part number TR116550. This wear edge is mounted along the back side of the lower edge of the housing, behind the blower auger, where it rides on the pavement.
Specifically fits the Heavy Duty Blowers which have the flat shaped wear bars mounted inside the blower housing at an angle.
This edge mounts using the carriage bolts UNDER the blower and the flange nuts holding the edge are inside the housing and visible when you stand looking at the blower from the front. The row of flange nuts is along the blowers leading edge behind the augers.
Reversible, this blower wear bar provides two wear edges to extend its wear life.
Please view our photos for an example of the wear bars location and specific mounting method. The white arrows in our picture highlight the lock nuts which are visible inside the housing, which hold the wear bar.
Our SBS wear bar includes the wear indicator holes on the blower wear bar to make it easier to know when the blower bar should be flipped over and the new wear bar on the other side used.
The 3 holes grouped together on the wear bar as shown on our product in the photo’s is a unique feature to the HEAVY DUTY wear bars on Deere front mounted blowers.
Our SBS wear bar is thicker and wider than the Deere wear bar, to provide longer wear life.
This blower specifically says “Heavy Duty” in a decal on the blower’s housing as shown in the photo.
Another specific identifying feature of this blower is when you look at the inside of the blower housing, you will notice there are a row of lock nuts behind the auger. These secure the blowers wear bar.
This blower is typically mounted to the tractor with a front 3 point hitch, instead of using the front Quick Tach Hitch mount used with the snow plow.
Eliminates the pavement abrasion caused by the steel wear bar on OEM equipment.
Includes all new, corrosion resistant stainless steel hardware to install on your blower.
Shipped complete, in one piece for maximum strength and long wear life.
Our UHMW wear edge is custom made to replace the John Deere Steel wear bar which fits on the bottom of the Heavy Duty Deere 54" snowblower. This part is a crucial wear bar to protect the snow blower housing against the surface wear which occurs as the blower is pushed across the pavement.
If you are looking to protect your pavement against damage from abrasion from the steel on the snow blower case, this wear edge will greatly reduce the snow blower's abrasion and reduce wear on the blower housing case.
This part is made from UHMW material which is highly abrasion resistant and intended to be used in high wear environments. This edge mounts in the same manner as the OEM steel edge, using bolts from the bottom of the blower housing and lock nuts which secure the wear edge the bottom of the blower.
For the ultimate in protecting your pavement against wear and damage from the blower, we recommend our UHMW Wear bar be used on your blower in conjunction with our UHMW Blower Shoes or our Rubber wear shoes which protect the pavement as well.
Make sure you consider our UHMW blower shoes at the same time to provide pavement protection and also best outfit your blower for stability and pavement work,.
We have a listing tiled “UHMW Shoes and Blower Wear Bar, what you should know”. If you order using the combined link, it will save you 10% on the package of shoes and blower.
Thank you for your interest in our products.
Includes Free Ground Shipping
in the Lower 48 States.
This part is for the Heavy Duty 54” John Deere front mounted Snowblower, Replaces Deere Part number TR116550. This wear edge is mounted along the back side of the lower edge of the housing, behind the blower auger, where it rides on the pavement.
Specifically fits the Heavy Duty Blowers which have the flat shaped wear bars mounted inside the blower housing at an angle.
This edge mounts using the carriage bolts UNDER the blower and the flange nuts holding the edge are inside the housing and visible when you stand looking at the blower from the front. The row of flange nuts is along the blowers leading edge behind the augers.
Reversible, this blower wear bar provides two wear edges to extend its wear life.
Please view our photos for an example of the wear bars location and specific mounting method. The white arrows in our picture highlight the lock nuts which are visible inside the housing, which hold the wear bar.
Our SBS wear bar includes the wear indicator holes on the blower wear bar to make it easier to know when the blower bar should be flipped over and the new wear bar on the other side used.
The 3 holes grouped together on the wear bar as shown on our product in the photo’s is a unique feature to the HEAVY DUTY wear bars on Deere front mounted blowers.
Our SBS wear bar is thicker and wider than the Deere wear bar, to provide longer wear life.
This blower specifically says “Heavy Duty” in a decal on the blower’s housing as shown in the photo.
Another specific identifying feature of this blower is when you look at the inside of the blower housing, you will notice there are a row of lock nuts behind the auger. These secure the blowers wear bar.
This blower is typically mounted to the tractor with a front 3 point hitch, instead of using the front Quick Tach Hitch mount used with the snow plow.
Eliminates the pavement abrasion caused by the steel wear bar on OEM equipment.
Includes all new, corrosion resistant stainless steel hardware to install on your blower.
Shipped complete, in one piece for maximum strength and long wear life.
Our UHMW wear edge is custom made to replace the John Deere Steel wear bar which fits on the bottom of the Heavy Duty Deere 54" snowblower. This part is a crucial wear bar to protect the snow blower housing against the surface wear which occurs as the blower is pushed across the pavement.
If you are looking to protect your pavement against damage from abrasion from the steel on the snow blower case, this wear edge will greatly reduce the snow blower's abrasion and reduce wear on the blower housing case.
This part is made from UHMW material which is highly abrasion resistant and intended to be used in high wear environments. This edge mounts in the same manner as the OEM steel edge, using bolts from the bottom of the blower housing and lock nuts which secure the wear edge the bottom of the blower.
For the ultimate in protecting your pavement against wear and damage from the blower, we recommend our UHMW Wear bar be used on your blower in conjunction with our UHMW Blower Shoes or our Rubber wear shoes which protect the pavement as well.
Make sure you consider our UHMW blower shoes at the same time to provide pavement protection and also best outfit your blower for stability and pavement work,.
We have a listing tiled “UHMW Shoes and Blower Wear Bar, what you should know”. If you order using the combined link, it will save you 10% on the package of shoes and blower.
Thank you for your interest in our products.
Many of our items are kept in stock much of the year. As seasonal demand increases we produce additional parts trying to maintain the proper inventory levels. At times, we are temporarily out of stock on some items. Should this happenm we will advise you of the estimated shipping date of your order when your order is placed. We will update you during the production period of any change in the estimated shipping date. Once your order ships, you will be provided the shipping tracking numbers and an expected delivery date. Thank you for your interest in our products. We sincerely appreciate it.