Moose 72" Front Plow Rubber Edge Kits to replace the steel plow edge
Kit includes FREE USPS UPS Ground delivery in the lower 48.
This kit includes our 3 levels of Rubber Plow Edge replacement kits, to replace the steel plow edge grinding on the pavement and damaging the drives and walks. These three rubber plow edge kits are
Standard Duty Rubber Plow Edge with 4” tall by 1/2” thick rubber edge
Heavy Duty Rubber Plow Edge with 4” tall by 3/4” thick rubber edge
Severe / Extreme Duty Plow Edge 6” tall by 3/4” thick rubber edge
each edge is held on by our UHMW Mounting Strap, the width of the plow and 1/2” thick by 2” wide. Machined for perfect installation
Complete set of Corrosion resistant Hardware
Installation and Use Instructions included in each kit. Installation times range from 20 minutes to 45 minutes, depending upon plow condition, experience, erc.
Our Standard Duty Rubber Plow Edge is our residential kit for the plow owner doing their residential snow clearing. Our Standard Duty rubber is 4” tall and 1/2” thick and had mounting holes across the top of the rubber edge, which mounts on the plow.
Our Heavy Duty Rubber Plow Edge kit is for the plow owner plowing their own driveways and a few for neighbors. Our Heavy Duty rubber edge is 4” tall, 3/4” thick so its 50% thicker than the Standard Duty rubber edge.
Our Extreme / Severe Duty Rubber Plow Edge kit is made from our 6” tall, 3/4” thick plow edge which is double sided and fully adjustable for maximum wear life. This edge can be installed and adjusted with use, then flipped over and an entirely new wear edge is waiting for when the first wear edge is depleted.
These edges mount with our UHMW Mounting strap, machined from 1/2” thick UHMW material for proper support and securing of the rubber edges.
Use of any of these kits allows you to remove the steel plow edge on the plow and install the rubber edge. This ends the pavement noise, abrasion damage and allows the plow operator to push snow onto the grass areas and not destroy sprinkler heads, etc. ,
Important Details
Kit installation time varies from 20 minutes to 45 minutes, depending upon tools, experience, etc.
You can NOT use the steel plow edge to hold the rubber plow edge onto the plow as the steel plow edge hangs down too far and is too large. it interferes with the rubber edge function and can damage the rubber plow edge.
Please avoid using impact and air tools to install these kits. The high speed of spinning the hardware can gall the finish and damage the bolts.
Please lubricate all hardware before installation and when removing hardware. Use silicone or another suitable lubricant.
.For best results on the 72” Moose Plow, we suggest our kit with the total components to make the installation process easy and to get the best results from the plow with the rubber edge.
Our kit provides everything needed to switch from the steel edge to the rubber edge on the 72” Moose Plow. Clean the pavement safely, quietly and without the scraping and banging of the steel plow edge. Those who have switched from the steel edge to the rubber plow edge kit, love the results and are very pleased with the improvement to their Moose Plows performance.
Please contact us with any questions. We are glad to help…
Thank you for your interest in our products.
Kit includes FREE USPS UPS Ground delivery in the lower 48.
This kit includes our 3 levels of Rubber Plow Edge replacement kits, to replace the steel plow edge grinding on the pavement and damaging the drives and walks. These three rubber plow edge kits are
Standard Duty Rubber Plow Edge with 4” tall by 1/2” thick rubber edge
Heavy Duty Rubber Plow Edge with 4” tall by 3/4” thick rubber edge
Severe / Extreme Duty Plow Edge 6” tall by 3/4” thick rubber edge
each edge is held on by our UHMW Mounting Strap, the width of the plow and 1/2” thick by 2” wide. Machined for perfect installation
Complete set of Corrosion resistant Hardware
Installation and Use Instructions included in each kit. Installation times range from 20 minutes to 45 minutes, depending upon plow condition, experience, erc.
Our Standard Duty Rubber Plow Edge is our residential kit for the plow owner doing their residential snow clearing. Our Standard Duty rubber is 4” tall and 1/2” thick and had mounting holes across the top of the rubber edge, which mounts on the plow.
Our Heavy Duty Rubber Plow Edge kit is for the plow owner plowing their own driveways and a few for neighbors. Our Heavy Duty rubber edge is 4” tall, 3/4” thick so its 50% thicker than the Standard Duty rubber edge.
Our Extreme / Severe Duty Rubber Plow Edge kit is made from our 6” tall, 3/4” thick plow edge which is double sided and fully adjustable for maximum wear life. This edge can be installed and adjusted with use, then flipped over and an entirely new wear edge is waiting for when the first wear edge is depleted.
These edges mount with our UHMW Mounting strap, machined from 1/2” thick UHMW material for proper support and securing of the rubber edges.
Use of any of these kits allows you to remove the steel plow edge on the plow and install the rubber edge. This ends the pavement noise, abrasion damage and allows the plow operator to push snow onto the grass areas and not destroy sprinkler heads, etc. ,
Important Details
Kit installation time varies from 20 minutes to 45 minutes, depending upon tools, experience, etc.
You can NOT use the steel plow edge to hold the rubber plow edge onto the plow as the steel plow edge hangs down too far and is too large. it interferes with the rubber edge function and can damage the rubber plow edge.
Please avoid using impact and air tools to install these kits. The high speed of spinning the hardware can gall the finish and damage the bolts.
Please lubricate all hardware before installation and when removing hardware. Use silicone or another suitable lubricant.
.For best results on the 72” Moose Plow, we suggest our kit with the total components to make the installation process easy and to get the best results from the plow with the rubber edge.
Our kit provides everything needed to switch from the steel edge to the rubber edge on the 72” Moose Plow. Clean the pavement safely, quietly and without the scraping and banging of the steel plow edge. Those who have switched from the steel edge to the rubber plow edge kit, love the results and are very pleased with the improvement to their Moose Plows performance.
Please contact us with any questions. We are glad to help…
Thank you for your interest in our products.
Kit includes FREE USPS UPS Ground delivery in the lower 48.
This kit includes our 3 levels of Rubber Plow Edge replacement kits, to replace the steel plow edge grinding on the pavement and damaging the drives and walks. These three rubber plow edge kits are
Standard Duty Rubber Plow Edge with 4” tall by 1/2” thick rubber edge
Heavy Duty Rubber Plow Edge with 4” tall by 3/4” thick rubber edge
Severe / Extreme Duty Plow Edge 6” tall by 3/4” thick rubber edge
each edge is held on by our UHMW Mounting Strap, the width of the plow and 1/2” thick by 2” wide. Machined for perfect installation
Complete set of Corrosion resistant Hardware
Installation and Use Instructions included in each kit. Installation times range from 20 minutes to 45 minutes, depending upon plow condition, experience, erc.
Our Standard Duty Rubber Plow Edge is our residential kit for the plow owner doing their residential snow clearing. Our Standard Duty rubber is 4” tall and 1/2” thick and had mounting holes across the top of the rubber edge, which mounts on the plow.
Our Heavy Duty Rubber Plow Edge kit is for the plow owner plowing their own driveways and a few for neighbors. Our Heavy Duty rubber edge is 4” tall, 3/4” thick so its 50% thicker than the Standard Duty rubber edge.
Our Extreme / Severe Duty Rubber Plow Edge kit is made from our 6” tall, 3/4” thick plow edge which is double sided and fully adjustable for maximum wear life. This edge can be installed and adjusted with use, then flipped over and an entirely new wear edge is waiting for when the first wear edge is depleted.
These edges mount with our UHMW Mounting strap, machined from 1/2” thick UHMW material for proper support and securing of the rubber edges.
Use of any of these kits allows you to remove the steel plow edge on the plow and install the rubber edge. This ends the pavement noise, abrasion damage and allows the plow operator to push snow onto the grass areas and not destroy sprinkler heads, etc. ,
Important Details
Kit installation time varies from 20 minutes to 45 minutes, depending upon tools, experience, etc.
You can NOT use the steel plow edge to hold the rubber plow edge onto the plow as the steel plow edge hangs down too far and is too large. it interferes with the rubber edge function and can damage the rubber plow edge.
Please avoid using impact and air tools to install these kits. The high speed of spinning the hardware can gall the finish and damage the bolts.
Please lubricate all hardware before installation and when removing hardware. Use silicone or another suitable lubricant.
.For best results on the 72” Moose Plow, we suggest our kit with the total components to make the installation process easy and to get the best results from the plow with the rubber edge.
Our kit provides everything needed to switch from the steel edge to the rubber edge on the 72” Moose Plow. Clean the pavement safely, quietly and without the scraping and banging of the steel plow edge. Those who have switched from the steel edge to the rubber plow edge kit, love the results and are very pleased with the improvement to their Moose Plows performance.
Please contact us with any questions. We are glad to help…
Thank you for your interest in our products.
While you can use the Moose Plows steel plow edge to mount the new rubber edge, we strongly encourage you to purchase our custom made steel mounting strap to install the new Moose Plow rubber edge. Our steel mounting strap is the correct size for you to get the most wear out of our rubber edge. If you use your steel Moose plow edge, due to the plows design, the steel plow edge is going to hang down and limit the amounf of thr new rubber edge which you can use.
Its best to remove the steel plow edge from the Moose plow, place all mounting hardware in the Moose Plow steel edge and set the steel plow edge aside for either future use, or to sell to another Moose Plow owner. The steel strap we produce for installing the rubber plow edge is the correct sizr and will assure you get full value of the rubber edge and not risk the old steel plow edge from making contact with the plow’s Thank you…….