Snowblower Drift Cutter 'Cooper Bars" M88984, UHMW Material with Hardware
Free Shipping via Ground Delivery with USPS to the Lower 48 States
Our UHMW Drift Cutter “Cooper Bars” are Extremely Strong Drift Cutter bars for mounting on the ends of the snow blowers side panels. These bars serve several purposes. They cut through the deep snow which is above the snow blower to help snow drop down so the blower can process it.
These are also very handy position indicators so you can see from the tractor just where the blower ends are located.
We include stainless hardware and flat washers and lock nuts for installation.
Sold as a pair , this purchase of our SET gets you the following
(2) Drift cutter bars which are 21” long, and 1.25” thick and 1.75” wide
(4) 3/8” x 1.5” Stainless Cap Screws
(8) 3/8” Stainless Flat Washers
(4) 3/8” stainless Lock Nut
These replace M88984 Steel Drift Cutters
These fit the following Blowers
46” Deere Single Stage Snow Blower
47” Deere Two Stage Snow Thrower
54” Deere Two Stage Snow Thrower
47” Deere Two Stage Heavy Duty Snow Thrower
54” Deere Two Stage Heavy Duty Snow Thrower
60” Deere Heavy Duty Two Stage Snow Thrower
These are sold under part number M88984 from Deere for $49 each or $53 each with hardware. We sell our superior Cooper Bars for $100 per pair including Stainless Mounting Hardware.
Why do we call these Cooper Bars? Because our SBS K9 friend Cooper and his dad suggested me make these since so many Deere blowers either have just one bar or no bars on them when sold. \
By making these Cooper bars and offering a superior product which doesn’t bend, doesn’t rust, doesn’t need to be painted or powder coated and which includes Stainless Hardware to install it, our Cooper bars will be a great upgrade to any snowblower and also make sure our K9 pal Cooper gets credit for his product build suggestions.
Thank You Cooper !
The UHMW Material is a revolutionary product which will
never rust
never need painting or powder coating
Is Extremely strong and resilient.
The drift cutters will flex slightly if they encounter impact or other similar types of loads.
Very durable and very strong, these drift cutters should last as long as the blower does.
What is UHMW?
It is a form of plastic which is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction, It is self-lubricating and highly resistant to abrasion.
Some forms of UHMW are up to 15 times more resistant to abrasion than carbon steel. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.
Source of Information is Wikipedia of which Sulley Bear Solutions, LLC is a proud financial supporter of the Wikipedia Foundation.
Thank you for your interest in our products.
Free Shipping via Ground Delivery with USPS to the Lower 48 States
Our UHMW Drift Cutter “Cooper Bars” are Extremely Strong Drift Cutter bars for mounting on the ends of the snow blowers side panels. These bars serve several purposes. They cut through the deep snow which is above the snow blower to help snow drop down so the blower can process it.
These are also very handy position indicators so you can see from the tractor just where the blower ends are located.
We include stainless hardware and flat washers and lock nuts for installation.
Sold as a pair , this purchase of our SET gets you the following
(2) Drift cutter bars which are 21” long, and 1.25” thick and 1.75” wide
(4) 3/8” x 1.5” Stainless Cap Screws
(8) 3/8” Stainless Flat Washers
(4) 3/8” stainless Lock Nut
These replace M88984 Steel Drift Cutters
These fit the following Blowers
46” Deere Single Stage Snow Blower
47” Deere Two Stage Snow Thrower
54” Deere Two Stage Snow Thrower
47” Deere Two Stage Heavy Duty Snow Thrower
54” Deere Two Stage Heavy Duty Snow Thrower
60” Deere Heavy Duty Two Stage Snow Thrower
These are sold under part number M88984 from Deere for $49 each or $53 each with hardware. We sell our superior Cooper Bars for $100 per pair including Stainless Mounting Hardware.
Why do we call these Cooper Bars? Because our SBS K9 friend Cooper and his dad suggested me make these since so many Deere blowers either have just one bar or no bars on them when sold. \
By making these Cooper bars and offering a superior product which doesn’t bend, doesn’t rust, doesn’t need to be painted or powder coated and which includes Stainless Hardware to install it, our Cooper bars will be a great upgrade to any snowblower and also make sure our K9 pal Cooper gets credit for his product build suggestions.
Thank You Cooper !
The UHMW Material is a revolutionary product which will
never rust
never need painting or powder coating
Is Extremely strong and resilient.
The drift cutters will flex slightly if they encounter impact or other similar types of loads.
Very durable and very strong, these drift cutters should last as long as the blower does.
What is UHMW?
It is a form of plastic which is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction, It is self-lubricating and highly resistant to abrasion.
Some forms of UHMW are up to 15 times more resistant to abrasion than carbon steel. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.
Source of Information is Wikipedia of which Sulley Bear Solutions, LLC is a proud financial supporter of the Wikipedia Foundation.
Thank you for your interest in our products.
Free Shipping via Ground Delivery with USPS to the Lower 48 States
Our UHMW Drift Cutter “Cooper Bars” are Extremely Strong Drift Cutter bars for mounting on the ends of the snow blowers side panels. These bars serve several purposes. They cut through the deep snow which is above the snow blower to help snow drop down so the blower can process it.
These are also very handy position indicators so you can see from the tractor just where the blower ends are located.
We include stainless hardware and flat washers and lock nuts for installation.
Sold as a pair , this purchase of our SET gets you the following
(2) Drift cutter bars which are 21” long, and 1.25” thick and 1.75” wide
(4) 3/8” x 1.5” Stainless Cap Screws
(8) 3/8” Stainless Flat Washers
(4) 3/8” stainless Lock Nut
These replace M88984 Steel Drift Cutters
These fit the following Blowers
46” Deere Single Stage Snow Blower
47” Deere Two Stage Snow Thrower
54” Deere Two Stage Snow Thrower
47” Deere Two Stage Heavy Duty Snow Thrower
54” Deere Two Stage Heavy Duty Snow Thrower
60” Deere Heavy Duty Two Stage Snow Thrower
These are sold under part number M88984 from Deere for $49 each or $53 each with hardware. We sell our superior Cooper Bars for $100 per pair including Stainless Mounting Hardware.
Why do we call these Cooper Bars? Because our SBS K9 friend Cooper and his dad suggested me make these since so many Deere blowers either have just one bar or no bars on them when sold. \
By making these Cooper bars and offering a superior product which doesn’t bend, doesn’t rust, doesn’t need to be painted or powder coated and which includes Stainless Hardware to install it, our Cooper bars will be a great upgrade to any snowblower and also make sure our K9 pal Cooper gets credit for his product build suggestions.
Thank You Cooper !
The UHMW Material is a revolutionary product which will
never rust
never need painting or powder coating
Is Extremely strong and resilient.
The drift cutters will flex slightly if they encounter impact or other similar types of loads.
Very durable and very strong, these drift cutters should last as long as the blower does.
What is UHMW?
It is a form of plastic which is highly resistant to corrosive chemicals except oxidizing acids; has extremely low moisture absorption and a very low coefficient of friction, It is self-lubricating and highly resistant to abrasion.
Some forms of UHMW are up to 15 times more resistant to abrasion than carbon steel. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.
Source of Information is Wikipedia of which Sulley Bear Solutions, LLC is a proud financial supporter of the Wikipedia Foundation.
Thank you for your interest in our products.